Community discussions

MikroTik App
 
aqdasios
just joined
Topic Author
Posts: 6
Joined: Thu Feb 02, 2012 9:53 am

queue problem with RB 751u

Tue Feb 14, 2012 10:33 am

i make a queue (800k/800k) up/down..
the problem is the speed of the target download is limited with 800k,, but the target upload is NOT LIMITED !!

the queue interface is to [bridge1]
[bridge1] ports is [ether2]
DHCP pool is 192.168.1.10/24

attached the screen shots::
111.JPG
222.JPG
333.JPG

thank you
You do not have the required permissions to view the files attached to this post.
 
aqdasios
just joined
Topic Author
Posts: 6
Joined: Thu Feb 02, 2012 9:53 am

Re: queue problem with RB 751u

Wed Feb 15, 2012 11:53 am

any one can answer me ??
 
User avatar
TrollMan
Member Candidate
Member Candidate
Posts: 168
Joined: Mon Apr 04, 2011 9:25 pm

Re: queue problem with RB 751u

Wed Feb 15, 2012 1:05 pm

can you do a printout of the queue, interfaces and firewall and post it?
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: queue problem with RB 751u

Wed Feb 15, 2012 1:32 pm

This need to be rechecked, but i have heard that:

pingtest doesn't use actual traffic - it sends small packet (64 byte) and then sends big packet (1518 byte) record the latency difference. Lets say small packet was delivered after 5ms, big packet after 9ms. so in essence 1518-64=1454 bytes were delivered in 4ms (Google is saying 1 bytes/millisecond = 0.00762939453 Mbps) so we get that link speed is 2,77Mbps, but we actually used only few packets.

Not the most precise way to check your limits :) - use popular torrents, lets say some freeware Linux distribution (wave to ACTA), to check your queues.

Who is online

Users browsing this forum: CaptainRisky, kevinds, Ramas and 24 guests