What's this? 79V?
My RBSXTG-5HPnD-SAr2 with 6.24 show this strange /system/health value.
With 6.1 (default) they show 124V and with 6.18 they show 11.9V and 23°C that is something correct.
I made "upgrade firmware" after system upgrade, obviously.
How can I solve?
Thanks
-
-
solelunauno
Member Candidate
- Posts: 119
- Joined:
- Location: Roseto Capo Spulico CS Italy
- Contact:
SXT system health voltage
You do not have the required permissions to view the files attached to this post.
-
-
shahbazian
Trainer
- Posts: 169
- Joined:
- Location: Iran
- Contact:
Re: SXT system health voltage
Do you upgrade the RouterBoot too?
If you have not upgrading RouterBoot after RouterOS upgrade, run this command:and then reboot your router.
If you have not upgrading RouterBoot after RouterOS upgrade, run this command:
Code: Select all
/system routerboard upgrade
Re: SXT system health voltage
And that was your mistakeI made "upgrade firmware" after system upgrade, obviously.
, see 6.23 - system health - is not working properly.-
-
solelunauno
Member Candidate
- Posts: 119
- Joined:
- Location: Roseto Capo Spulico CS Italy
- Contact:
Re: SXT system health voltage
I upgraded the RouterBoot and now it's 3.19, so Sob is right and it isn't really my mistake, but something wrong with routerboot 3.19. I'll downgrade where I need it. Thanks.
Re: SXT system health voltage
we were able to reproduce this and will make a fix in the next RouteBoard firmware.
Who is online
Users browsing this forum: No registered users and 38 guests