Community discussions

MikroTik App
 
helectro
newbie
Topic Author
Posts: 46
Joined: Mon Jun 28, 2010 1:09 am

RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Tue Jul 07, 2015 1:36 am

on web http://routerboard.com/RB1100AHx2
Supported input voltage 10 V - 28 V
But
•User Guide
http://i.mt.lv/routerboard/files/rb1100ug.pdf
12-­‐24VDC;PoE on Ether13: 12-­‐24VDC
so work or NO with 27Vdc?

I want to connect to

Mean Well AD-155B specifications: AC-DC Enclosed power supply with UPS function; with Output 27.2Vdc
but already connected to port number 13 and now the port is unresponsive
I want to try connecting it directly to J11power connector,

but no longer responds as my first port 13, I want to get some confirmation if you can work with 27Vdc?
Thanking you in advance for any collaboration
 
Adav
just joined
Posts: 8
Joined: Fri Jun 12, 2015 3:59 am

Re: RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Tue Jul 07, 2015 3:27 pm

In my case of CCR1009-8G-1S-1S+PC

http://routerboard.com/CCR1009-8G-1S-1SplusPC

Supported input voltage 14 V - 57 V

On the box:

http://img.routerboard.com/mimg/1002_hi_res.png

18 - 56V

Actually works 13.5V

But in this case Health show 0.0V. In case power supply 24V - Health show 12.8V :)
 
User avatar
pukkita
Trainer
Trainer
Posts: 3051
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Tue Jul 07, 2015 4:12 pm

helectro how are you connecting to port 13?
 
helectro
newbie
Topic Author
Posts: 46
Joined: Mon Jun 28, 2010 1:09 am

Re: RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Tue Jul 07, 2015 5:18 pm

Hello. Adav, pukkita thank you very much for your attention

Multi port passive POE
http://www.ebay.com/itm/Multi-port-pass ... 33a0ab2ffe

on port 13 the green LED is always on, and does not appear like interface
You do not have the required permissions to view the files attached to this post.
 
User avatar
pukkita
Trainer
Trainer
Posts: 3051
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Tue Jul 07, 2015 8:54 pm

That's a 100BaseT injector, does that ether13 light-up led stays lit even after a reset?
 
helectro
newbie
Topic Author
Posts: 46
Joined: Mon Jun 28, 2010 1:09 am

Re: RB1100AHx2 work or NO with 27Vdc? difference in specifications on web and •User Guide

Wed Jul 08, 2015 1:08 am

I put a jack to have a second entrance, and a direct plug to connect the power supply with UPS meanwell 27 V.

since the port 13 but never worked again, no link does not turn on the router

I have the suspicion that accepted the 27 V?

  and not just for a whim, it is because I am running a UPS with all devices and up to now worked as a jewel, but I want to change the current router (rb1200) this
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 22 guests