Hello,

I have a problem on a site.
I have many interferences. (many networks with a signal strength between -76 and -96 dB)
Is it possible de modify the RX sensibility?
Actually the sensibility is -96db approximately, I wouldlike change it at the value -80dB.

Because, I enable DFS and the DFS change my frequency every time!
I haven't choise, I must keep the DFS.

Thank you for your help.

if you increase sensitivity you are also increasing noise so better find another quieter channel

What type of antenna is being used!

You can try setting Noise Floor Theshold in advanced wireless settings..

Hello,

Thank you for yours answers.

I use directive antenna. 9°/9°

I choised the best Channel.
I tested to modify the noise floor treshold. I set it at -100dB (-110dB by default.) and and my link was worst.

I enabled adaptive noise immunity,
changed HW-retry to 15,
enabled multicast helper,
tested all wireless protocol.

Others Ideas?
Thank you