Community discussions

MikroTik App
 
Rielcomp
just joined
Topic Author
Posts: 1
Joined: Tue Feb 02, 2016 10:39 pm

RB1100AH2, Capsman and cAP2n * 2

Wed Feb 03, 2016 2:07 am

I am very new to this so please be patient. I have the RB1100 with a cAP2n plugged into ports 11 and 12, controlled by Capsman. I have 192.168.0.0 on ether2, 192.168.1.0 on one cAP and 192.168.2.0 on the other cAP.

What I want is wireless clients on the 1.0 subnet to communicate with the 0.0 subnet, but not the 2.0 subnet.

What I have is three distinct subnets that do not fully communicate.

I can ping anything on the 0.0 subnet from any cAP, but the wirelessly connected clients, cannot.

I would appreciate if someone could point me in the right direction.

Thanks.

Who is online

Users browsing this forum: genesispro, Scoox, slimmy and 20 guests