(DHCP_VLAN1006)---->Netmetal5(Bridge)---->Netmetal5(Station Bridge)---->(VLAN1006)PowerBox(VLAN99)---->RB922UAGS-5HPacD(AP-Bridge)---->SXT(Station Bridge)---->HapLite
Data Vlan(1006)(through to the PowerBox)
Management Vlan(99)
*Packets which are tagged with 1006 comes to the Netmetal5(Station)
*Netmetal 5 Station and Station Bridge sites should pass them without changing its tag
*NetMetals should take their ips from VLAN1006
*1006 Tagged packets which comes to the PowerBox should pass Powerbox with no VLAN
*There is a DCHP Server of Management VLAN(99) which gives the IP address of devices under it (Except HapLite. Because it is PPPoE Client)
There is one more link from the PowerBox, i didn't mentioned about it. Because i must solve this issue immidiately. I tried to configure the devices but i couldn't reach the correct results. Could you tell me what configurations should i do?