AP1 - wAP ac - ros 6.35.2
AP2 - wAP ac - ros 6.35.2
wireless - cm2 6.35.2
testing on AP2 - 2.4GHz
I cannot find the ssid I defined.
log error: sometime shows: 4-way handshake timeout on router.
router settings:
Code: Select all
[admin@MikroTik-Router] > caps-man interface print
Flags: M - master, D - dynamic, B - bound,
X - disabled, I - inactive, R - running
# NAME RADIO-MAC MASTER-INTERFACE
0 M XI CAP-AP1-2.4G E4:8D:8C:4B:27:73 none
1 M B CAP-AP2-2.4G E4:8D:8C:72:C8:49 none
2 M XI CAP-AP2-5G E4:8D:8C:72:C8:48 none
Code: Select all
[admin@MikroTik-Router] > caps-man provisioning print
Flags: X - disabled
0 radio-mac=E4:8D:8C:4B:27:73 hw-supported-modes="" identity-regexp="" common-name-regexp=""
ip-address-ranges="" action=create-dynamic-enabled master-configuration=2.4G
slave-configurations="" name-format=cap name-prefix="2.4G-APs"
1 radio-mac=E4:8D:8C:72:C8:49 hw-supported-modes="" identity-regexp="" common-name-regexp=""
ip-address-ranges="" action=create-dynamic-enabled master-configuration=2.4G
slave-configurations="" name-format=cap name-prefix=""
Code: Select all
[admin@MikroTik-Router] > caps-man configuration print
0 name="2.4G" mode=ap ssid="UNI-MikroTik" country=china security=WAP2-AES
datapath.bridge=bridge-local channel=2.4GHz
Code: Select all
[admin@MikroTik-Router] > caps-man channel print
0 name="2.4GHz" band=2ghz-onlyn
Code: Select all
[admin@MikroTik-Router] > caps-man security print
0 name="WAP2-AES" authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm
passphrase="password"
Code: Select all
[admin@MikroTik-Router] > caps-man remote-cap print
# ADDRESS NAME STATE RADIOS
0 E4:8D:8C:72:C8:47/55454 CAP-E48D... Run 1
Code: Select all
[admin@MikroTik-Router] > caps-man radio print
Flags: L - local, P - provisioned
# RADIO-MAC INTERFACE REMOTE-CAP-NAME REMOTE-CAP-IDENTITY
0 P E4:8D:8C:72:C8:49 CAP-AP2-2.4G CAP-E48D8C72C847 MikroTik-AP2
On wAP ac
Code: Select all
[admin@MikroTik-AP2] /interface wireless> print
Flags: X - disabled, R - running
0 R ;;; managed by CAPsMAN
;;; channel: 2442/20-Ce/gn(20dBm), SSID: UNI-MikroTik, local forwarding
name="wlan1" mtu=1500 l2mtu=1600 mac-address=00:00:00:00:00:00
arp=enabled interface-type=Atheros AR9300 mode=ap-bridge
ssid="UNI-MikroTik" frequency=auto band=2ghz-onlyn
channel-width=20/40mhz-Ce scan-list=default wireless-protocol=any
vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none
wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes
default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
hide-ssid=no security-profile=default compression=no
anyone can help?
