Hi, today I bought hAP AC. I have a Macbook Pro Early 2015. Connect it to 5Ghz network and once I have a 600mbps, but now 350-400 is maximum. Macbook 20cm away from router.

Settings:

Too much power maybe. You should see values from the registration tab.

Sorry, I`m a newbie. Where is registration tab? Quick Set? And how to understand how much power I should set? I tried to set less power, but as result SNR does down in my bathroom. With maximum power it equals SNR from zyxel keenetic ultra.

Thanks.

Found how to fix that. I have to set "Channel width" to 20/40/80. But then I see Ceee, eCee, eeCe, eeeC - but do not know what does it mean. And please teach me how to set power for maximum performance with Registration table

How to improove real speed transfer speed over 5Ghz? I See that Tx-power too high and I do not know how to reduce it. By RJ-45 cable I have a 100MB/sec real speed but by wifi 5Ghz only 330Mbit/sec. Why?!




iperf by cable:
------------------------------------------------------------
[  3] local 192.168.1.10 port 50559 connected with 192.168.1.3 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  1.06 GBytes   910 Mbits/sec
[  3] 10.0-20.0 sec  1.06 GBytes   914 Mbits/sec
[  3]  0.0-23.8 sec  2.53 GBytes   913 Mbits/sec

iperf by 5Ghz:
------------------------------------------------------------
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   393 MBytes   330 Mbits/sec
[  3] 10.0-20.0 sec   390 MBytes   327 Mbits/sec
[  3] 20.0-30.0 sec   396 MBytes   333 Mbits/sec
[  3]  0.0-30.0 sec  1.15 GBytes   330 Mbits/sec