I have rb751 and nanostation m2 in bridge mode:
NSM does not support any encryption except WEP in ap-repeater mode.
I try to restrict connection to SSID on wlan1
Code: Select all
/interface wireless print
name="wlan1" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D5:05:3C arp=enabled
interface-type=Atheros AR92xx mode=bridge ssid="br" frequency=2412
band=2ghz-b/g channel-width=20mhz scan-list=default wireless-protocol=any
antenna-mode=rxa-txb vlan-mode=no-tag vlan-id=1 wds-mode=dynamic
wds-default-bridge=bridge-wds wds-ignore-ssid=no bridge-mode=enabled
default-authentication=no default-forwarding=no default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=yes security-profile=default
compression=no
Code: Select all
/interface wireless wds print
name="wds1" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D5:05:3C arp=enabled
arp-timeout=auto master-interface=wlan1 wds-address=DC:9F:DB:06:87:32
Code: Select all
/interface wireless access-list print
mac-address=DC:9F:DB:06:87:32 (NSM2 MAC) interface=wlan1 signal-range=-120..120
authentication=no forwarding=no ap-tx-limit=0 client-tx-limit=0
private-algo=none private-key="" private-pre-shared-key=""
management-protection-key="" vlan-mode=no-tag vlan-id=1
In this case HIDE SSID and ACCESS LIST does not working. I can see ssid "br" and can connect to it.
What can i do to prohibit any connection to "br" except NSM2?