How to reset RB433
Hardware talk

7 posts   •   Page 1 of 1
beepee
Member Candidate
Member Candidate
 
Posts: 136
Joined: Tue Sep 18, 2007 6:13 am

How to reset RB433

by beepee » Fri Sep 19, 2008 8:05 pm

Hi guys
I am having a problem with my RB433
My laptop cannot detect any of the ethernet ports when connected and I need to configure it
So I thinks resetting will work but after pressing a button I saw on the board for some seconds nothing seems to have happened.
Please, How can I reset RB433
I dont have a console cable as well

netrat
Member
Member
 
Posts: 403
Joined: Thu Jun 07, 2007 1:16 pm
Location: Virginia

Re: How to reset RB433

by netrat » Fri Sep 19, 2008 11:14 pm

You can't connect to the routerboard using the mac-address in winbox?

beepee
Member Candidate
Member Candidate
 
Posts: 136
Joined: Tue Sep 18, 2007 6:13 am

Re: How to reset RB433

by beepee » Mon Sep 22, 2008 10:26 am

I can't
Neither MAC or IP is working

User avatar
mrz
MikroTik Support
MikroTik Support
 
Posts: 4079
Joined: Wed Feb 07, 2007 1:45 pm
Location: Latvia

Re: How to reset RB433

by mrz » Mon Sep 22, 2008 10:54 am

Then you have to borrow or buy serial cable, because there is no reset jumpers on RB433

User avatar
normis
MikroTik Support
MikroTik Support
 
Posts: 19266
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: How to reset RB433

by normis » Mon Sep 22, 2008 10:57 am

of course there is a reset jumper on RB433, just as on all RouterBOARD models.

follow instructions here:
http://wiki.mikrotik.com/wiki/MikroTik_ ... d_Recovery
No answer to your question? How to write posts

User avatar
mrz
MikroTik Support
MikroTik Support
 
Posts: 4079
Joined: Wed Feb 07, 2007 1:45 pm
Location: Latvia

Re: How to reset RB433

by mrz » Mon Sep 22, 2008 11:04 am

Oh, that's good, I didn't know that there is a reset hole :)

beepee
Member Candidate
Member Candidate
 
Posts: 136
Joined: Tue Sep 18, 2007 6:13 am

Re: How to reset RB433

by beepee » Mon Sep 22, 2008 8:26 pm

Thanks
I got that

7 posts   •   Page 1 of 1

Who is online

Users browsing this forum: diode, honzam and 13 guests

It is currently Fri Nov 21, 2014 7:15 pm