Community discussions

MikroTik App
 
Sergioz
just joined
Topic Author
Posts: 14
Joined: Mon Apr 11, 2005 10:17 pm
Location: Moroocco from Côte d'Ivoire

Very Good performence report!!

Wed Nov 23, 2005 8:39 pm

I 'am very pleased to announce to all MT Os user a very good perfomence we get this week.

My company has got since two days ago the longest and fastest wireless link in Morocco: 20MB over 60KM PTP link!!.

Link is made of 2 RB500 MB with MT v 2.9.27 with nstreme-Dual on 5.8Ghz with 32 Dbi parabolic antenna from ITelite.


Thanks to Mikrotik Team!! Thanks very very much!!!
 
User avatar
HarvSki
Member
Member
Posts: 395
Joined: Fri May 28, 2004 3:37 pm
Location: London, UK

Wed Nov 23, 2005 11:36 pm

Wow that is fantastic! What wireless cards are you using?
 
jarosoup
Long time Member
Long time Member
Posts: 596
Joined: Sun Aug 22, 2004 9:02 am

Thu Nov 24, 2005 12:02 am

Congrats :)
Link is made of 2 RB500 MB with MT v 2.9.27 with nstreme-Dual on 5.8Ghz with 32 Dbi parabolic antenna from ITelite.
But, your OS version...is it 2.8.27 or 2.9.7??
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Thu Nov 24, 2005 1:16 am

What radio cards are you using on that link?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Thu Nov 24, 2005 11:36 am

Congrats :)
Link is made of 2 RB500 MB with MT v 2.9.27 with nstreme-Dual on 5.8Ghz with 32 Dbi parabolic antenna from ITelite.
But, your OS version...is it 2.8.27 or 2.9.7??
more likely v2.9.7 because you can't run v2.8.x on the RB500 :wink:
 
Sergioz
just joined
Topic Author
Posts: 14
Joined: Mon Apr 11, 2005 10:17 pm
Location: Moroocco from Côte d'Ivoire

Fri Nov 25, 2005 2:12 am

Wireless Card are four AR5414.
Soft is indeed V 2.9.7

By the way, after building the link we noticed a small problem and discovered the solution.

Problem:
If you try to make a bandwidth test on your soft or try to transfert a very huge file you may enconter a CPU overload and have no connection anymore over link.
Ping will not being possible anymore but Nstreme status will still being connected=yes.
Nstreme connection but no ping!

Solution:
You just have to disable and then enable your Nstreme interface on each side.

To atomate this just NetWatch and add at each side the othe device to be watched.
And then add these simlpe commands line for "On Down" status:
/interface wireless disable nstreme-dual disable nstreme1
/interface wireless enable nstreme-dual enable nstreme1

Do this on each side.

Hope this will help!
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Fri Nov 25, 2005 3:41 pm

please post your dual-nstreme configuration. Try to set the framer-policy to none or lower the framer-limit to 2000.

Who is online

Users browsing this forum: No registered users and 20 guests