Page 1 of 1
rb433 configuration
Posted: Tue Jul 12, 2011 9:17 pm
by onlysuraj
hello
i am using rb433 as access point and how to encrease tx/rx on rb433.
currently 15 user running on it and is not working so good.
plz help????
Re: rb433 configuration
Posted: Thu Jul 14, 2011 8:44 am
by imrankosi
i told you use queues option . or please give me your networking scnario so that we can look into your problem
Re: rb433 configuration
Posted: Thu Jul 14, 2011 9:55 am
by magnitude
Imran can i have yours email id....i m stucked at somewhere while configuring mikrotik.
Re: rb433 configuration
Posted: Thu Jul 14, 2011 10:11 am
by imrankosi
Re: rb433 configuration
Posted: Thu Jul 14, 2011 9:19 pm
by onlysuraj
i told you use queues option . or please give me your networking scnario so that we can look into your problem
I have 433 routerboard with three card r52 and made it as access point(router os v 4.11) .simply user connect to it and access the internet via server and a 450g configured as firewall in front of main link
There is no nat enabled and no dhcp on router.i have 5mbps link and 15 to 20 user on it
Band: 2.4 b+g
Mode :ap bridge
Freq:2447
Card rate fixed :21 dbm
Data rate :default
Re: rb433 configuration
Posted: Thu Jul 14, 2011 9:35 pm
by SurferTim
You mean R52H, correct? R52 won't last long set at 21db, especially in g mode (18db@6M and 15db@54M).
... with three card r52 and ....
Card rate fixed :21 dbm
Just checking...
Re: rb433 configuration
Posted: Mon Jul 18, 2011 5:23 pm
by imrankosi
Imran can i have yours email id....i m stucked at somewhere while configuring mikrotik.
imran_cool024@yahoo.com