Community discussions

MikroTik App
 
reza.mnp
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 90
Joined: Mon Jun 11, 2007 9:44 am
Location: ilam - iran
Contact:

maximum distance for two omnitik

Sat Nov 05, 2011 9:28 pm

maximum distance for sxt and omnitik is 5km.
maximum distance for sxt and another sxt is 10km.
maximum distance for two omnitik is ??
You do not have the required permissions to view the files attached to this post.
 
jandafields
Forum Guru
Forum Guru
Posts: 1515
Joined: Mon Sep 19, 2005 6:12 pm

Re: maximum distance for two omnitik

Sat Nov 05, 2011 11:11 pm

The max reliable distance between two Omnitiks is 1 km.

According to Mikrotik Link Calculator.
You do not have the required permissions to view the files attached to this post.
 
JorgeAmaral
Trainer
Trainer
Posts: 199
Joined: Wed Mar 04, 2009 11:53 pm
Location: /ip route add type=blackhole

Re: maximum distance for two omnitik

Sun Nov 06, 2011 2:09 am

The max reliable distance between two Omnitiks is 1 km.

According to Mikrotik Link Calculator.
Look at the power field, you have set 26 mw, but omnitik gives you 26 dBm that is 398mw.
 
jandafields
Forum Guru
Forum Guru
Posts: 1515
Joined: Mon Sep 19, 2005 6:12 pm

Re: maximum distance for two omnitik

Sun Nov 06, 2011 3:32 am

The max reliable distance between two Omnitiks is 1 km.

According to Mikrotik Link Calculator.
Look at the power field, you have set 26 mw, but omnitik gives you 26 dBm that is 398mw.
Dang! You are right, I didn't change the dropdown to dbm!
Ok, so the actual answer with that calculator is 6km. Although, i think that would be pushing it, especially since both ends are omni. The actual practical limit is probably around 4km or less, depending on surrounding noise.

Mikrotik officially says 5km Omnitik to STX, so it would definately be NOT MORE than that. How far are you actually wanting to go between 2 Omnitiks?
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: maximum distance for two omnitik

Mon Oct 22, 2012 4:56 pm

Removed, text was twice.
Last edited by jarda on Tue Oct 23, 2012 10:43 am, edited 1 time in total.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: maximum distance for two omnitik

Mon Oct 22, 2012 6:49 pm

Hi,
does anyone use the omnitiks in the wds mode (or similar) for connectivity distribution? If yes, what is the experience?

I would like to use 3-4 in approx. 200-400m distances (mostly clear visibility) for covering the country area of small houses when one would be acting as router with 2 wan connections and others will distribute the connectivity with approx 2-4 clients via both wifi or cable connections.

How it will work? Are there any limitations? What throughput can I expect thru the network?

Thank you in advance.

Who is online

Users browsing this forum: dwnldr, holvoetn and 25 guests