411UAHR V.5.11 with sierra MC8700
Wireless networks

2 posts   •   Page 1 of 1
jordanrichardo
just joined
 
Posts: 5
Joined: Fri Feb 24, 2012 5:35 am

411UAHR V.5.11 with sierra MC8700

by jordanrichardo » Fri Feb 24, 2012 5:44 am

Hello everyone,
I just recently purchased a 411UAHR and tried to use a known working Sierra MC8700 card PCIE-e card with it, but to no avail.
I get as far as "authenticated" but then it disconnects and redials the ppp connection.
Here is my info:
My 3g provider is Bell and I am in Ontario Canada.

/interface ppp-client
add add-default-route=yes allow=pap,chap,mschap1,mschap2 apn=inet.bell.ca \
data-channel=3 dial-command=ATDT dial-on-demand=no disabled=no \
info-channel=2 keepalive-timeout=10 max-mru=1500 max-mtu=1500 modem-init=\
"" mrru=disabled name=ppp-out1 null-modem=no password="" phone=*99# pin=\
"" port=usb2 profile=default use-peer-dns=yes user=""

I know that I have the right APN, and phone number, but I am not 100% on the data/info channels and if there are any modem initialization strings required.

Any suggestions would be greatly appreciated.

jordanrichardo
just joined
 
Posts: 5
Joined: Fri Feb 24, 2012 5:35 am

Re: 411UAHR V.5.11 with sierra MC8700

by jordanrichardo » Fri Feb 24, 2012 7:06 am

So I just solved my problem. I used this initialization string: at+cgdcont=1,"IP","inet.bell.ca"
And removed the entry from "APN"

2 posts   •   Page 1 of 1

Who is online

Users browsing this forum: No registered users and 13 guests

It is currently Fri Dec 19, 2014 11:39 am