-
-
mobile4lte
newbie
- Posts: 28
- Joined:
Why Huawei E5331 often sense got disconnected?
As we all know, huawei E5331 single linkage design, wifi access simple. General design can let you be clear at a glance, but my huawei E5331 display signal is full, strong. But often got disconnected, at first I thought it was a weak current problems, then I try several times are the same situation, why is this so? How to solve got disconnected problem?
Re: Why Huawei E5331 often sense got disconnected?
Hi,As we all know, huawei E5331 single linkage design, wifi access simple. General design can let you be clear at a glance, but my huawei E5331 display signal is full, strong. But often got disconnected, at first I thought it was a weak current problems, then I try several times are the same situation, why is this so? How to solve got disconnected problem?
Your post isn't making a whole lot of sense. Please type your question in Google Translate, in your native language, and then post the English-translated version here.
Are you trying to use your Huawei E5331 MiFi device as a 3G modem interface for your Routerboard?
Re: Why Huawei E5331 often sense got disconnected?
Is this possible at all?Are you trying to use your Huawei E5331 MiFi device as a 3G modem interface for your Routerboard?
To use Huawei E5331 MiFi device as a 3G modem interface for the Mikrotik Routerboard?
Re: Why Huawei E5331 often sense got disconnected?
I don't see it on compatibility list but it is still hope. If you plug it into your Mikrotik router (I assume you own a model with USB port or x86 machine), does it create a ppp-out interface automatically? If you check /system routerboard usb, do you see the device listed? What kind of RoS version are you using?Is this possible at all?Are you trying to use your Huawei E5331 MiFi device as a 3G modem interface for your Routerboard?
To use Huawei E5331 MiFi device as a 3G modem interface for the Mikrotik Routerboard?
Re: Why Huawei E5331 often sense got disconnected?
Yes it creates ppp-out interface when plugged in,I don't see it on compatibility list but it is still hope. If you plug it into your Mikrotik router (I assume you own a model with USB port or x86 machine), does it create a ppp-out interface automatically? If you check /system routerboard usb, do you see the device listed? What kind of RoS version are you using?
Yes there is an USB listing for it when plugged in
RoS details...
Code: Select all
/system> routerboard print
routerboard: yes
model: 751G-2HnD
serial-number: 3A6502CFECC5
current-firmware: 2.38
upgrade-firmware: 2.38
Guess all its left is to try using it..
Re: Why Huawei E5331 often sense got disconnected?
You may only need to play a bit with channels and you should be set to go.Who is online
Users browsing this forum: No registered users and 44 guests