Recently I bought Groove 5Hn - 2 nos and I have already RB 750
I was using RB 750 to distribute Internet to all the users using Hotspot service in it
Now I want to extend my network to another location about 2 km distance.I want to use the same internet which I am using with Hotspot with RB 750
I want ot use Groove 5Hn ...one on my building top and another on the other building 2 km away with 18 dB antenna
I did the bridging- one in Ap bridge and other in WDS....The link is perfect and I can login both the devices
The problem is ..WHen I connect internet cable from my exisitng RB 750 router to the Groove 5Hn on my building top the internet stops and no body including the old user building...no body get internet...But still I can access both the Groove 5Hn
Kindly help
My internet is ADSL
I use telephone connecting to Netgear Modem and from there to RB 750 and from there through dhcp of rb 750 to all users.
From Netgear to Port no1 of rb 750 and port 2 to all the users through switches....Kindly help me....regards....Raj

Have you changed the IP addresses from default?

Ya..I have changed Ip to 192.168.200.1 (my buildingtop) and 192.168.200.2 to new bldg....still not solved
Now i tried without Ip address ...I get DHCP IP from RB750
Kindly help me

Have you changed the IP addresses from default?

wirelessly it is conntected and there is no internet at the new bldg
When i connect the grooves 5hn in the network...all the internet stops ..including the other users who are connected with cable
please help

Anyone please help..........

Anyone please help..........

two years later you still haven't done it ?

we now have a simple way to extend your network. upgrade your devices to RouterOS v6.10, and open the IP address in your web browser. In QUICKSET which will open, choose mode "bridge" on the both devices. This will allow you to set up a wireless bridge to connect two remote networks.

I want to use rb950g 2hnd devices as access points for connecting wirelessly to computers