I've tried hiding the SSID and changing frequency with no luck. Disabling WPA is not an option.
I've looked at this http://wiki.mikrotik.com/wiki/Wireless_Debug_Logs but it doesn't have any advice or anything useful at all really.
My 711UA-2HnD is about 6 months old and I did not get them on my previous - could it be the router itself? Nothing at all has changed on the Ubiquiti end.
MikroTik - bridge
Code: Select all
/interface wireless security-profiles
set [ find default=yes ] group-ciphers="" supplicant-identity=MikroTik \
unicast-ciphers=""
add authentication-types=wpa2-psk eap-methods="" management-protection=\
allowed mode=dynamic-keys name=wpa2 supplicant-identity="" \
wpa2-pre-shared-key=XXXX
/interface wireless
set 0 antenna-gain=11 band=2ghz-b/g country=australia disabled=no \
frequency-mode=regulatory-domain l2mtu=2290 mode=bridge name=wlan \
security-profile=wpa2 wds-default-bridge=wds-bridge wds-mode=dynamic \
wireless-protocol=802.11
Code: Select all
oct/15 08:20:30 wireless,info debug: XXXX@wlan: disconnected, group k
ey exchange timeout
Code: Select all
Oct 12 19:07:07 wireless: ath0 Received deauth from XXXX. Reason: Group key handshake timeout (16).
Oct 12 19:07:07 wireless: ath0 New Access Point/Cell address:Not-Associated
Oct 12 19:07:07 wpa-supplicant: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys