Community discussions

MikroTik App
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

I want the best settings a distance of 30 km p2p

Mon Nov 11, 2013 11:18 pm

He
I want the best settings a distance of 30 km p2p

Tools used to it
Dish 32db On both sides
metal 5SHPn On both sides

Please, please advise me the settings for the transfer of 80 MB
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

Re: I want the best settings a distance of 30 km p2p

Tue Nov 12, 2013 6:11 pm

I did not see any response to the subject
I hope the interaction
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: I want the best settings a distance of 30 km p2p

Tue Nov 12, 2013 6:56 pm

Use - dual parabolic antenna on both sides. And rb911 on both sides in metal box
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

Re: I want the best settings a distance of 30 km p2p

Tue Nov 12, 2013 8:10 pm

Dear friend
Now reference is 48 on both sides
ccq is 98
Which amounts to the Internet is 30 MB
 I want to reach the Internet to 80 MB
What is the solution
 
wirelesswaves
Member
Member
Posts: 311
Joined: Thu May 31, 2007 12:38 am

Re: I want the best settings a distance of 30 km p2p

Wed Nov 13, 2013 11:08 am

You want 80MB but you only use single chain product !
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

Re: I want the best settings a distance of 30 km p2p

Fri Nov 15, 2013 6:07 pm

I use one product series and I try I receive 80 MB, but up only 30 MB
Please Asafna to Settings appreciate that I receive 80 MB
Thank you very much
 
mistry7
Forum Guru
Forum Guru
Posts: 1480
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: I want the best settings a distance of 30 km p2p

Sun Nov 17, 2013 2:03 am

Post your wireless config

Channel width
Wireless Mode ( WDS?)
802.11 or nv2??



Mistry 7
 
Trackboy
Member Candidate
Member Candidate
Posts: 215
Joined: Mon Oct 31, 2011 11:19 am
Location: Hungary

Re: I want the best settings a distance of 30 km p2p

Sun Nov 24, 2013 2:19 pm

may i have a question?

80 Mbit/sec or 80 MB/sec? I am very beginner in the networks, but this is interesting for me

My friend and me would like to start an wireless ISP, and the distance almost the same in our case as well.

The distance is 22,43 km, and we are planning 100/50 Mbit/sec maximum TCP traffic, maybe an RB 800 with Dbii cards capable of this speed in long range links.
Last edited by Trackboy on Sat Nov 30, 2013 10:10 am, edited 1 time in total.
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

Re: I want the best settings a distance of 30 km p2p

Fri Nov 29, 2013 3:16 pm

Thank you reply on the subject I have a non-arrival of MB required which is 80 MB because I've received only 30 MB and the problem is in the ccq which is 100/40 I hope that you find me a solution to this problem

Settings are used by the

Party sender
Mode: ap bridge
Band: 5GHz-only-N
CHANNEL Width: 20/40MHz HT Above
Frequency: 5555
Wireless Protocol: nv2

Tx/Rx Signal Strength (dBm) :-47/56

Tx/Rx CCQ (%) :40/100


The receiving party

Mode: station wds
Band :5GHz-only-N
CHANNEL Width: 20/40MHz HT Above
Frequency: 5555
Wireless Protocol: nv2

Tx/Rx Signal Strength (dBm) :-47/56

Tx/Rx CCQ (%) :40/100


The distance 31 km
 
Trackboy
Member Candidate
Member Candidate
Posts: 215
Joined: Mon Oct 31, 2011 11:19 am
Location: Hungary

Re: I want the best settings a distance of 30 km p2p

Sat Nov 30, 2013 10:07 am

If this is an Point-Point backbone network,why are you using wds?I think you should try out this setup:

A point:mode:bridge
B point:mode:station-bridge

And maybe you should try out with Nv2 as well.

And what's like the line of sight,and the freshnel zone is clear? Because 31 kms is very long range.
Last edited by Trackboy on Sat Jan 31, 2015 10:15 am, edited 1 time in total.
 
wirelesswaves
Member
Member
Posts: 311
Joined: Thu May 31, 2007 12:38 am

Re: I want the best settings a distance of 30 km p2p

Sun Dec 01, 2013 7:08 pm

you are using single chain, (1 antenna).. You will not get what you want to achieve until you change your equipment to use 2 chains at both ends!!
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: I want the best settings a distance of 30 km p2p

Sun Dec 01, 2013 10:19 pm

Your link has an problem. There is 9dbm difference between chains that affects also the CCQ. You must resolve this problem first and is not an software problem if you have identical setups on both ends.
 
kraic
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Tue Oct 19, 2010 10:31 am
Location: Croatia
Contact:

Re: I want the best settings a distance of 30 km p2p

Sun Dec 01, 2013 10:40 pm

best is:
20/40 above
nv2
0,4,12 chains
no-busy frequency
 
Trackboy
Member Candidate
Member Candidate
Posts: 215
Joined: Mon Oct 31, 2011 11:19 am
Location: Hungary

Re: I want the best settings a distance of 30 km p2p

Mon Dec 02, 2013 12:56 pm

I read here on this forum 70 Mbit/sec TCP speed with 30 dBi Grid antennas on 11km, 31 km is definitely too much,that's why asked the plan is achiveve the 80 Mbit/sec?Maybe with dual chain antenna and properly CPU performance it is possible.
 
ahmedd
just joined
Topic Author
Posts: 21
Joined: Mon Apr 22, 2013 1:16 am

Re: I want the best settings a distance of 30 km p2p

Sun Dec 29, 2013 10:10 pm

Thank you for helping me will try my observations received from you and then tell you the result
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: I want the best settings a distance of 30 km p2p

Mon Jan 06, 2014 5:23 pm

Don't forget setup Ack-timing.

Who is online

Users browsing this forum: Bing [Bot], sinisa, synchro and 27 guests