Community discussions

MikroTik App
  4. RouterOS
  5. Wireless Networking

RB912UAG-5HPnD-OUT

Post Reply
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

RB912UAG-5HPnD-OUT

Fri Dec 13, 2013 8:22 am

does this product compatible with UBNT's basestation antenna? because i recently have 3 units basestation break their Rocket M5 radios, and i haven't replaced any of them yet.
Top
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

Re: RB912UAG-5HPnD-OUT

Fri Dec 13, 2013 8:40 am

one more question, so R11e-5HnD could be used to extend 1 radio on this board, so we can use this for 2 basestation antennas?
Top
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26385
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB912UAG-5HPnD-OUT

Fri Dec 13, 2013 9:40 am

YES to both questions, although you might need longer antenna cables for this setup. RP-SMA should be easy to come by, just replace your antenna default cable with a longer one.
Top
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

Re: RB912UAG-5HPnD-OUT

Fri Dec 13, 2013 11:22 am

YES to both questions, although you might need longer antenna cables for this setup. RP-TNC should be easy to come by, just replace your antenna default cable with a longer one.
i thought the board outputs for antennas are RP-SMA?
Top
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26385
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB912UAG-5HPnD-OUT

Fri Dec 13, 2013 11:24 am

YES to both questions, although you might need longer antenna cables for this setup. RP-TNC should be easy to come by, just replace your antenna default cable with a longer one.
i thought the board outputs for antennas are RP-SMA?
SORRY, early morning mistake ;) Fixed .
Top
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

Re: RB912UAG-5HPnD-OUT

Sat Dec 14, 2013 9:49 am

unfortunately, www.mikrotik.co.id don't have them yet :?
Top
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26385
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB912UAG-5HPnD-OUT

Mon Dec 16, 2013 11:34 am

unfortunately, http://www.mikrotik.co.id don't have them yet :?
The RB912 or the longer pigtails?
Top
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

Re: RB912UAG-5HPnD-OUT

Tue Dec 17, 2013 5:13 am

unfortunately, http://www.mikrotik.co.id don't have them yet :?
The RB912 or the longer pigtails?
both. although, the pigtail is not a problem anymore, i already a store on ebay, with variety connectors option. is this the right one?
Code: Select all
http://www.ebay.com/itm/RP-SMA-male-RP-SMA-male-jack-center-straight-RG316-cable-jumper-pigtail-50cm-/331084398777?pt=US_Radio_Comm_Coaxial_Cables_Connectors&hash=item4d162b00b9

also, if I add R11e-5HnD, am I going to need 2 of this?
Code: Select all
http://www.ebay.com/itm/RP-SMA-female-plug-nut-bulkhead-MMCX-male-right-angle-RG316-pigtail-15cm-/220952885083?pt=US_Radio_Comm_Coaxial_Cables_Connectors&hash=item3371d1775b
one more thing,
RB912UAG-5HPnD + R11e-5HnD are not going to interfere to each other? as they are working on the same band, and too close to each other. i'm planning to use them on different channel though

thanks for the assistance
Top
 
User avatar
winet
Member Candidate
Member Candidate
Topic Author
Posts: 273
Joined: Fri Mar 16, 2007 4:49 pm
Location: Indonesia

Re: RB912UAG-5HPnD-OUT

Wed Dec 18, 2013 9:46 am

i am desperately looking for this unit, but can't find anywhere close to my region
Top
Post Reply

Who is online

Users browsing this forum: broderick and 83 guests
  4. RouterOS
  5. Wireless Networking