I recently installed a RB2011UiAS-2HND-in (the new model with the PoE on port 10), and aside from the LCD bug it's a great device, except for one issue.
Setup:
Ros 6.7
WAN on port 1
LAN on port 3-5
BRIDGE with ether3-5 and WiFi
NAS connected on ether3
My cable provider gives me a 60mb/6mb connection, and my laptop with an Atheros 9285 WiFi card is connected via WiFi.
When doing speedtest over the internet (wifi - bridge - wan) the tests result in about 50-60mb, very nice.
But when I transfer files from my home-built nas (wifi - bridge - lan), the speed is about 15mb down, 30mb up. It doesn't matter if I use SMB, FTP or HTTP.
When I disable WiFi, and connect a cable between my laptop and ether4 or ether5, I get around 800-900mb, just what I expected.
I also noticed that when transferring over Wifi to my nas the traffic isn't shown on the bridge, but when connected wired it is shown.
Export with related settings:
Code: Select all
/interface bridge
add admin-mac=0A:78:D3:5A:24:14 auto-mac=no name=BRIDGE-RTR-HSPT protocol-mode=rstp
add admin-mac=5E:EE:48:1C:9E:A3 arp=proxy-arp auto-mac=no l2mtu=1598 name=BRIDGE-RTR-PRIV protocol-mode=rstp
add admin-mac=2A:8C:F7:03:0B:5E auto-mac=no name=BRIDGE-RTR-PUBL protocol-mode=rstp
/interface ethernet
set [ find default-name=ether1 ] mac-address=D8:D3:85:9D:81:74 name=ether1-gateway
set [ find default-name=ether2 ] mac-address=D4:CA:6D:B1:55:81 name=ether2-trunk
set [ find default-name=ether3 ] mac-address=D4:CA:6D:B1:55:82 name=ether3-priv
set [ find default-name=ether4 ] mac-address=D4:CA:6D:B1:55:83 name=ether4-priv
set [ find default-name=ether5 ] mac-address=D4:CA:6D:B1:55:84 name=ether5-priv
set [ find default-name=ether6 ] mac-address=D4:CA:6D:B1:55:85 name=ether6-master-priv
set [ find default-name=ether7 ] mac-address=D4:CA:6D:B1:55:86 master-port=ether6-master-priv name=ether7-slave-priv
set [ find default-name=ether8 ] mac-address=D4:CA:6D:B1:55:87 master-port=ether6-master-priv name=ether8-slave-priv
set [ find default-name=ether9 ] mac-address=D4:CA:6D:B1:55:88 master-port=ether6-master-priv name=ether9-slave-priv
set [ find default-name=ether10 ] mac-address=D4:CA:6D:B1:55:89 master-port=ether6-master-priv name=ether10-slave-priv
set [ find default-name=sfp1 ] disabled=yes mac-address=D4:CA:6D:B1:55:7F name=sfp1-gateway
/interface vlan
add interface=ether2-trunk l2mtu=1594 name=VLAN0010-PRIV vlan-id=10
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n bridge-mode=disabled channel-width=20/40mhz-ht-above country=netherlands disabled=no distance=indoors l2mtu=2290 mode=ap-bridge name=wlan-priv security-profile=wifi-priv ssid=Wifi \
wireless-protocol=802.11
/interface bridge port
add bridge=BRIDGE-RTR-PRIV interface=ether3-priv
add bridge=BRIDGE-RTR-PRIV interface=ether4-priv
add bridge=BRIDGE-RTR-PRIV interface=ether5-priv
add bridge=BRIDGE-RTR-PRIV interface=ether6-master-priv
add bridge=BRIDGE-RTR-PRIV interface=VLAN0010-PRIV
add bridge=BRIDGE-RTR-PRIV interface=wlan-priv