Community discussions

MikroTik App
 
nirmalpaschal
newbie
Topic Author
Posts: 26
Joined: Thu Nov 14, 2013 12:59 pm

nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 11:24 am

ROUTER NOT ABLE TO OPEN IN DHCP USER END? hOW TO OPEN THAT?
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 11:46 am

Have you used "winbox" to open router?
 
nirmalpaschal
newbie
Topic Author
Posts: 26
Joined: Thu Nov 14, 2013 12:59 pm

Re: nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 11:57 am

using winbox, i would like to open the router in dhcp user end-
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 12:04 pm

If you click on the three dots see you normally mac and IP-address click on mac and click on "connect".

Check if the firewall on your pc the communication block.
Disable the firewall and try than if it works.

What routerboard have you?
 
nirmalpaschal
newbie
Topic Author
Posts: 26
Joined: Thu Nov 14, 2013 12:59 pm

Re: nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 12:30 pm

Thanks for ur reply!!!

I want to open the Router in subscriber side with dhcp gateway, for example my subscriber side will get the ip 192.168.215.14
Subnet 255.255.255.0 Gateway :192.168.215.1

So i need to open from the subscriber side through the winbox with ip of 192.168.215.1
 
User avatar
satman1w
Member Candidate
Member Candidate
Posts: 279
Joined: Mon Oct 02, 2006 11:47 am

Re: nOT ABLE TO OPEN MIKRO TIK

Wed Jan 22, 2014 3:04 pm

Thanks for ur reply!!!

I want to open the Router in subscriber side with dhcp gateway, for example my subscriber side will get the ip 192.168.215.14
Subnet 255.255.255.0 Gateway :192.168.215.1

So i need to open from the subscriber side through the winbox with ip of 192.168.215.1
I did not quite understand the problem.
You have users connected to one of the mikrotik ports. Users connected to this port are receiving their IP addresses from DHCP (running on the same port). Now you would like to access the router with winbox from any computer in that subnet.
Is this the situation or I have missed something?

Regards
 
nirmalpaschal
newbie
Topic Author
Posts: 26
Joined: Thu Nov 14, 2013 12:59 pm

Re: nOT ABLE TO OPEN MIKRO TIK

Thu Jan 30, 2014 10:51 am

Yes you are right
 
nirmalpaschal
newbie
Topic Author
Posts: 26
Joined: Thu Nov 14, 2013 12:59 pm

Re: nOT ABLE TO OPEN MIKRO TIK

Fri Jan 31, 2014 7:17 am

Thanks got the solution!!!!
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: nOT ABLE TO OPEN MIKRO TIK

Fri Jan 31, 2014 8:39 am

and that is...
Tell us more how you did it pleace

Who is online

Users browsing this forum: No registered users and 17 guests