I've seen multiple posts, many of them a bit upset of the lack of support for different 4G cards. Instead of joining those threads I'll try with a new one here...

I sit on a Huawei e3276s, will it become supported in the nearby future or do I need to look for a different solution?

Is there some kind of tricks to get it working already with RouterOS 6.7 (on a rb2011uas-2hnd-in)?

Someone done it?

Sincerely
Johan

The Huawei E3276 4G LTE Dongle has many variants on different frequency bands, you can choose the right one according to the LTE Frequency bands of your country. Such as:
Huawei E3276s-150 (HiLink/OmanTel/TELEKOM SPEEDSTICK LTE III)
4G LTE FDD - 800/900/1800/2100 / 2600Mhz.
3G HSDPA/HSUPA/UMTS/WCDMA - 900 / 1900 / 2100Mhz.
2G GSM - 850 / 900 / 1800 / 1900Mhz.
Huawei E3276s-151 (Vodafone K5007/Megafon M150-1)
4G LTE FDD 800/900/1800/2100/2600Mhz.
3G HSDPA/HSUPA/UMTS/WCDMA.
2G GSM/GPRS/EDGE.
You can know more about this item from 4Ginthebox.com:
http://www.4ginthebox.com/huawei-e3276.html

Hope this helps!

possible support for this device in the new versions RouterOS?

Megafon 4G LTE modem m100-1
USB\VID_0408&PID_EA42&REV_0000&MI_03
Qualcomm CDMA Technologies MSM


thank

I need support of wwan0 LTE interface for Huawei E3276 (Мегафон М150-1 4G), could provide remote access to router with the modem (modem via serial port works well already).

It uses huawei_cdc_ncm driver on linux.

I need support of wwan0 LTE interface for Huawei E3276 (Мегафон М150-1 4G), could provide remote access to router with the modem (modem via serial port works well already).

It uses huawei_cdc_ncm driver on linux.

please contact support@mikrotik.com and provide remote access to the board with the modem - then we could check if we could add support or not.