Community discussions

MikroTik App
 
inibir
Member Candidate
Member Candidate
Topic Author
Posts: 116
Joined: Thu Nov 25, 2010 2:25 pm
Location: lebanon
Contact:

bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 4:59 pm

hello all

i have al link from my station to ISP company the distance is 2.3km
in the 2 station have parabolic (38dbm, 32dbm) UbiQuity

the wireless cant (52hn, dbi-pn) NStreme + NV2

AP Settings:
[ali@khalil-->both] /interface wireless> pri
Flags: X - disabled, R - running
0 R name="wlan3 - Path" mtu=1500 mac-address=00:21:A4:31:
interface-type=Atheros AR5413 mode=ap-bridge ssid="xX
frequency=5785 band=5ghz-a channel-width=40mhz-turbo
wireless-protocol=nv2-nstreme antenna-mode=ant-a wds-
wds-default-bridge=bridge1 wds-ignore-ssid=no bridge-
default-authentication=yes default-forwarding=yes def
default-client-tx-limit=0 hide-ssid=no security-profi
compression=no


Station Settings:
[admin@HDP to Khalil] /interface wireless> pri
Flags: X - disabled, R - running
0 R name="wlan3" mtu=1500 mac-address=00:21:A4:35:0D:18 arp=enabled
interface-type=Atheros AR92xx mode=station-wds ssid="HDP Base"
frequency=5250 band=5ghz-a/n channel-width=20/40mhz-ht-below
scan-list=5250 wireless-protocol=nv2-nstreme wds-mode=dynamic
wds-default-bridge=bridge1 wds-ignore-ssid=no bridge-mode=enabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no

and the bandwidth test max-recive is 2mbps
i need min recive 10mbps for 30 Client
any solution ????
2.png
You do not have the required permissions to view the files attached to this post.
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 5:10 pm

One chain on one card looks like is broken. Try other channels and signal must be over -40 not -27. ALso must be almost the same not 20dbm difference. Also for 2 km and 10mbps, SXT lite 5 is more than enough.
 
inibir
Member Candidate
Member Candidate
Topic Author
Posts: 116
Joined: Thu Nov 25, 2010 2:25 pm
Location: lebanon
Contact:

Re: bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 5:17 pm

i think signal strength -27dbm is better than -40dBm
 
lordzar
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Sat May 29, 2004 7:47 pm

Re: bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 5:49 pm

Stronger signal is not always better.

Imagine someone standing right next to you shouting in your ear. You might be able to make it out but it would be better if they lowered their voice. Same thing with radio.

There is a sweet spot for radio signals. Too weak or too strong is not good.



Sent from my Nexus 7 using Tapatalk
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 7:16 pm

The signal is to match on -41 dB the signal can disturb itselfs.
-60 dB is good and normal.
 
inibir
Member Candidate
Member Candidate
Topic Author
Posts: 116
Joined: Thu Nov 25, 2010 2:25 pm
Location: lebanon
Contact:

Re: bad signal @ 2km 2xParabolic

Sun Mar 16, 2014 7:36 pm

OK thanks
 
Trackboy
Member Candidate
Member Candidate
Posts: 215
Joined: Mon Oct 31, 2011 11:19 am
Location: Hungary

Re: bad signal @ 2km 2xParabolic

Mon Mar 17, 2014 12:27 pm

The signal is to match on -41 dB the signal can disturb itselfs.
-60 dB is good and normal.

Yes, i have got an SXT-Lite5 1 km link, the signal strenght is around -60dBm, but i can not use 802.11 N in this town, because the local WISP using every channel, but for 2-3 km the sxt should be good, if the freshnel zone is perfectly clean

Who is online

Users browsing this forum: GoogleOther [Bot] and 29 guests