Community discussions

MikroTik App
 
samir
just joined
Topic Author
Posts: 12
Joined: Fri Mar 07, 2014 12:43 am

Is it possible no one can help me?

Fri Mar 21, 2014 6:59 pm

Is it possible no one can help me for my problem i Tried everything but its same ccq is not good but signal is good

see this pic
You do not have the required permissions to view the files attached to this post.
 
zyzelis
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Apr 08, 2012 9:25 pm

Re: Is it possible no one can help me?

Fri Mar 21, 2014 8:45 pm

Is it possible no one can help me for my problem i Tried everything but its same ccq is not good but signal is good

see this pic
I hope it will help you... signal is good 8)
You do not have the required permissions to view the files attached to this post.
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: Is it possible no one can help me?

Fri Mar 21, 2014 10:19 pm

Try to reduce the output power.
 
samir
just joined
Topic Author
Posts: 12
Joined: Fri Mar 07, 2014 12:43 am

Re: Is it possible no one can help me?

Sat Mar 22, 2014 1:30 pm

Try to reduce the output power.

i tray but its same ?
 
plisken
Forum Guru
Forum Guru
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: Is it possible no one can help me?

Sat Mar 22, 2014 1:33 pm

Try another channel.
 
samir
just joined
Topic Author
Posts: 12
Joined: Fri Mar 07, 2014 12:43 am

Re: Is it possible no one can help me?

Sat Mar 22, 2014 2:52 pm

Try another channel.

i tray but its same how moch i can make output power and u can Help me through the program TeamViewe pls
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 510
Joined: Wed Jan 25, 2012 10:23 am

Re: Is it possible no one can help me?

Sat Mar 22, 2014 3:50 pm

Do you have more than 1 antenna very close to each other ?
 
samir
just joined
Topic Author
Posts: 12
Joined: Fri Mar 07, 2014 12:43 am

Re: Is it possible no one can help me?

Sat Mar 22, 2014 4:53 pm

Do you have more than 1 antenna very close to each other ?

I have many of them on the tower I think that's the direction of the tower where many Noise How can I get rid of Noise


i have 3 Customer have this problem the other dont have and just in p2p
 
User avatar
joshaven
Member
Member
Posts: 438
Joined: Fri May 06, 2011 1:50 am
Location: USA
Contact:

Re: Is it possible no one can help me?

Sun Mar 23, 2014 2:25 am

The rx CCQ being so low means that much of the information your radio is receiving is not usable. I would suspect an antenna issue or some reflection issues. Do you have something large near by that the signal could be reflecting off of? I don't think its interference because your signal to noise level is good.


Joshaven Potter
http://joshaven.com
Sent from my iPhone using Tapatalk
 
User avatar
joshaven
Member
Member
Posts: 438
Joined: Fri May 06, 2011 1:50 am
Location: USA
Contact:

Re: Is it possible no one can help me?

Sun Mar 23, 2014 2:28 am

It also seems odd that your only showing two modulations do you have most of the others disabled? I would go back to the default modulations if you have them customized.


Joshaven Potter
http://joshaven.com
Sent from my iPhone using Tapatalk
 
samir
just joined
Topic Author
Posts: 12
Joined: Fri Mar 07, 2014 12:43 am

Re: Is it possible no one can help me?

Sun Mar 23, 2014 12:16 pm

It also seems odd that your only showing two modulations do you have most of the others disabled? I would go back to the default modulations if you have them customized.


Joshaven Potter
http://joshaven.com
Sent from my iPhone using Tapatalk

hi
if u have mail i can show u all i tray evry think but its same its just in Mikrotik RB912 i have ubnt roket no problem with this
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 510
Joined: Wed Jan 25, 2012 10:23 am

Re: Is it possible no one can help me?

Sun Mar 23, 2014 9:18 pm

These problems with low ccq are always from cable, antenna or interference. Don't blame the board or settings. But if you fixed the bitrate try going auto for test.

Who is online

Users browsing this forum: maigonis, nonolk and 31 guests