hi i'm experienced a strange problem while using omnitik. We used SX-HG as AP and Omnitiks as clients for the wireless link of 1 km and 2 kms respectively. In each client side we have fixed a Megapixel IP camera. The signal strengths are 70/72 and 74/76 and CCQ is almost above 80% for both links. The problem i encountered is the video streaming is very slow. my doubt is whether the omnitiks are not intended for video applications or some other problems.

the omnitiks are not intended for video applications or some other problems

The OmniTik are intended to create a link, not to check what data are inside the link.

ya what u said is absolutely right. but my question is do omnitiks supports for video application specifically IP surveillance as omnis are the only option is my client side.

I use 4 OmniTik on water tower (47m), one RB1100 as switch and hotspot provider, and 23 ptmp sxt lite 5 for video surveillance, with HikVison Cameras (20 x 1080p, 1 Dome, 2 720p). Each point have also one hotspot RB411AH+R52nM.
The swith used for link ptmp, camera and hotspot, are one RB750UP.
I use two SXT-Gigabit for link the two OmniTik (150Mbit/s, 100Mb ethernet are not sufficent) to DVR on security office.
And one metal for provide Internet to RB1100

I use 4 OmniTik on water tower (47m), one RB1100 as switch and hotspot provider, and 23 ptmp sxt lite 5 for video surveillance, with HikVison Cameras (20 x 1080p, 1 Dome, 2 720p). Each point have also one hotspot RB411AH+R52nM.
The swith used for link ptmp, camera and hotspot, are one RB750UP.
I use two SXT-Gigabit for link the two OmniTik (150Mbit/s, 100Mb ethernet are not sufficent) to DVR on security office.
And one metal for provide Internet to RB1100

thanks for the information. so is their any other way to get streaming with without interruption.