Currently i have in my lab 2 wireless links each doing around 100 mbit real tcp throughput.
I've created bond on mikrotik device with balance-rr mode according to this http://wiki.ubnt.com/Mikrotik_bonding.
After setting up bonding i'm getting around 110mbit bandwidth on TCP test:
when i've disconnected one link the other one is doing more than 100mbit according to bandwidth test, same when i disconnect the other one:
When doing UDP test i'm getting around 200mbit throughput on bond:
and 100mbit on single link as it should be:
I've connected pc to both mikrotik devices and setup iperf and web server.
On flash based speedtests i'm getting only around 35mbit:
on iperf with 10 connections around 65mbit.
And with ftp transfer around 20mbit only.
Also when i'm trying to ping ubnt devices connected in this bond i'm getting like 60% packet loss, while mikrotik device behind them is running with perfect 2ms ping. Should it be like that?
I have also bridged one interface (ether3) with bonding interface but that shouldn't be a problem?
My config:
Interfaces:
Bonding:
I am not very familiar with mikrotik devices.
Anyone had similar issues? Any help appreciated.