[SOLVED] Ubiquiti AP and Mikrotik CPE

planetcaravan · Thu Jun 12, 2014 8:01 pm

Hi,

is possible to connect a Mikrotik wireless device to an Ubiquiti AP with WPA2?

rextended · Thu Jun 12, 2014 9:12 pm

Yes, with standard 802.11

lambert · Thu Jun 12, 2014 9:58 pm

In other words, make sure AirMax is disabled on the Ubiquiti AP. And do not try to use nstream or NV2 on the MikroTik client.

planetcaravan · Thu Jun 12, 2014 11:08 pm

Some years ago I try to made this link without any proprietary protocol but I had no connection.
I will try as you suggest. Thanks

planetcaravan · Fri Jun 13, 2014 3:22 pm

It works!
AP Ubiquiti with WPA2 AES, WDS, airMax off, Mikrotik CPE connected to the AP
I've attached two screenshots.

CyberTod · Fri Jun 13, 2014 3:28 pm

You can change the Wireless protocol on the Mikrotik CPE from 'any' to '802.11'. This will shorten connect/reconnect times.

rextended · Fri Jun 13, 2014 5:55 pm

also change channel width from 40 to 20 on ubnt

set mode to station-wds on mikrotik and disable WDS on mikrotik....