Community discussions

MikroTik App
 
User avatar
ViREnG
Member Candidate
Member Candidate
Topic Author
Posts: 229
Joined: Tue Aug 11, 2009 4:01 pm
Location: Boryspil

Wireless link trough high voltage power lines is possible ?

Tue Sep 30, 2014 11:09 am

hello friends

I have a wireless pop-site 200 meter behind of the high voltage power lines , I now have some links trough power lines . some of links disconnect without a bad signal .
below images are shown of pop-site position , is this problem from Power lines ?
You do not have the required permissions to view the files attached to this post.
 
User avatar
rickfrey
Trainer
Trainer
Posts: 609
Joined: Sun Feb 14, 2010 11:41 pm
Location: Van, Texas
Contact:

Re: Wireless link trough high voltage power lines is possibl

Tue Sep 30, 2014 5:57 pm

It could be. I have set up several links like you are describing and some have worked perfectly and others have been plagued with problems. Line noise from AC power can be a real problem with wireless links. One location I had problems with had so much line noise that you couldn't even get FM radio stations to come until you were at least 25 feet away from the building. You can try different frequencies, sometimes that will help. The ultimate solution will be separating your signal from the plane that the interference is on, either by going higher or by going lower. If you have a clear LOS, sometime going lower works.

Who is online

Users browsing this forum: boingolover and 42 guests