Community discussions

MikroTik App
 
aqeelabass
just joined
Topic Author
Posts: 8
Joined: Sat Oct 25, 2014 1:03 am

Programming RB 912 with Sector Antenna

Sat Oct 25, 2014 2:08 am

Hello
I am a new member of this forum and this is the first theme I wish to help me in settings RB912
My problem is not in my power to transfer more than 19 M In the device with Sector Antenna
I will attach the picture settings and I hope to clarify where the problem
Greetings to all


Image
Image
Image

Image
Image
Image
Image



I currently use a filter to prevent malicious programs such as program cain And to stop the program ubnt discovry
And also shut down dhcp Please also make sure of the filter
Image
/interface bridge filter
add action=drop arp-opcode=request chain=forward dst-mac-address=FF:FF:FF:FF:FF:FF/FF:FF:FF:FF:FF:FF mac-protocol=arp
add action=drop chain=forward disabled=no dst-port=10001 ip-protocol=udp mac-protocol=ip
add action=drop chain=input disabled=no dst-port=10001 ip-protocol=udp mac-protocol=ip
add action=drop chain=output disabled=no dst-port=10001 ip-protocol=udp mac-protocol=ip
add action=drop chain=forward in-interface=!ether1 out-interface=!ether1
add chain=forward mac-protocol=pppoe-discovery
add chain=forward mac-protocol=pppoe
add action=drop chain=forward
 
aqeelabass
just joined
Topic Author
Posts: 8
Joined: Sat Oct 25, 2014 1:03 am

Re: Programming RB 912 with Sector Antenna

Wed Oct 29, 2014 6:57 pm

up up up up
 
aqeelabass
just joined
Topic Author
Posts: 8
Joined: Sat Oct 25, 2014 1:03 am

Re: Programming RB 912 with Sector Antenna

Wed Oct 29, 2014 7:00 pm

:shock: :shock: :shock: up up
 
0ldman
Forum Guru
Forum Guru
Posts: 1465
Joined: Thu Jul 27, 2006 5:01 am

Re: Programming RB 912 with Sector Antenna

Fri Oct 31, 2014 7:23 am

You've got the speeds locked between 18 and 36mbps. You've almost maxed out what you can run on 802.11a anyway. You need dual polarity or at least 802.11n modulations enabled.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Programming RB 912 with Sector Antenna

Fri Oct 31, 2014 8:25 am

Switch off bridge filter. It is really resource consuming activity that slows down the throughput. Go by routing instead bridging. It will separate the networks so you would not need bridge filter.

Who is online

Users browsing this forum: Nullcaller and 35 guests