We bought for testing in company office RB OmniTIK UPA-5HnD firmware 6.24. I got basic setup done. And wifi access point show up, but some devices don't see access point at all.
How possible troubleshoot that problem ?
Example
Laptop Dell E6430
Code: Select all
[user@vm ~]$ lspci | grep Broad
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select all
[user@ca01nlap00] > /interface wireless print
Flags: X - disabled, R - running
0 R name="wlan" mtu=1500 mac-address=4C:5E:0C:67:4C:05 arp=enabled interface-type=Atheros AR92xx mode=ap-bridge ssid="ap-031"
frequency=auto band=5ghz-a/n channel-width=20/40mhz-ht-above scan-list=default,wlan_list wireless-protocol=802.11
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes
default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=netlab_pr01
compression=no
