Community discussions

MikroTik App
 
derr12
Member
Member
Topic Author
Posts: 411
Joined: Fri May 01, 2009 11:32 pm

Speeds when using 2 MT dual band 912 units.

Sat Jan 10, 2015 1:29 am

Hi guys, i have a need to fix a dead zone by making a repeater setup.

Right now i have 2 912 outdoor units. 1 is acting in AP bridge mode with both interfaces.

The second device, the repeater is connecting to the first AP on the 2.4ghz network In station psuedobridge mode. The second radio is a 5ghz radio acting as a AP-bridge.

I have all interfaces on the second 912 unit in a bridge.

Connected to the 2nd 912's ethernet interface im getting the expected 30mbits speedtest result. When repeated over the 5ghz network, im getting half of that. I am getting 144mbit air rate.

I disconnected from the 2.4ghz network and plugged in the ethernet port directly to an internet source and am getting 30mbit again. Shouldnt i be getting full speed when feeding from the other AP in the lab?

Who is online

Users browsing this forum: Cloudtechiq [Bot], Ponytred and 24 guests