Community discussions

MikroTik App
 
praiser110
just joined
Topic Author
Posts: 4
Joined: Mon Feb 04, 2013 10:30 pm

point to multipoint data rate

Mon Feb 09, 2015 8:31 am

Hello friends,

I have PtMP wireless system, all clients are connected to APs with 5Ghz Band A, I need to fix each client data rate, I tried to limite each client from data rate to 6 MB but it effect to all users sum, I mean when I checked 6Mb on clients data rate and let the data rate on ap be unlimited, ap just limited to the 6MB.

I tried to limit client on access list but it decrease the CCQ and clients wont have good bandwidth.

so I need 100/100 CCQ
and limit each client CPE to 5 MB on wireless
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Mon Feb 09, 2015 7:02 pm

Have you tried queueing? I guess it is better than influencing the wireless.
 
praiser110
just joined
Topic Author
Posts: 4
Joined: Mon Feb 04, 2013 10:30 pm

Re: point to multipoint data rate

Mon Feb 09, 2015 8:41 pm

I have accounting server so no need to manual queue, but actually there is security risk to let CPEs have unlimited bandwidth to AP.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Mon Feb 09, 2015 10:13 pm

So you can try queues on the Ap.
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: point to multipoint data rate

Mon Feb 09, 2015 10:56 pm

Add stations to Access List.
Double click on mac/line/etc.
Set Ap Tx limit.
Set Ap Rx limit.
Done.

Or set 5Mhz channel.
Limit the speed at client station is a very good practice also as jarda said.
 
asalspammer
just joined
Posts: 2
Joined: Thu Feb 12, 2015 7:38 am

Re: point to multipoint data rate

Thu Feb 12, 2015 7:45 am

Hotspot will ask RADIUS server whether to allow the login or not. If not allowed, alogin.html page will be displayed (it can be modified to do anything). If not allowed, flogin.html (or login.html) page will be displayed, which will redirect client back to the external authentication server.
 
asalspammer
just joined
Posts: 2
Joined: Thu Feb 12, 2015 7:38 am

Re: point to multipoint data rate

Thu Feb 12, 2015 7:45 am

I tried to limit client on access list but it decrease the CCQ and clients wont have good bandwidth.

Who is online

Users browsing this forum: No registered users and 25 guests