Hi

I'm trying to connect SXT Lite 5 station bridges with a NetMetal 5 (bridge) that is connected to a RFElements Sector Carrier Class 5-17 antenna

I can't get the SXT and NetMetal 5 to connect via NV2

Is this normal ?
Can all antennas operate with NV2 protocol ?

thanks
yann

The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.

thanks jmontero

The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.

NV2 has come a lot way since its introduction and I find now NV2 is much more resilient to interference than 802.11

Which wireless mode are you setting on each end?

nv2

The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.

NV2 has come a lot way since its introduction and I find now NV2 is much more resilient to interference than 802.11

thanks n21roadie

Make sure the netmetal has a recent ROS and firmware versions.

Can you post /interface wireless export for both the netmetal and SXT?