Community discussions

MikroTik App
 
ExtremeInternet
just joined
Topic Author
Posts: 4
Joined: Mon Aug 24, 2015 12:53 am

Capsman 2 SSID Issue

Mon Aug 24, 2015 1:00 am

Hello!!

I have a strange issue that has never cropped up before while using Capsman. I am running Version 6.31 and have also used 6.29.1 and no difference. I have 2 devices one is the mikrotik Rb2011 main router and the other is mikrotik RB433 access point. I have 2 SSID setup on the main router in Capsman - Guest Wifi and Internal Wifi. They both work great on the RB2011 but when I enable Capsman on the RB433 AP it only pushes over the Internal Wifi and not the Guest Wifi SSID and settings. the Internal Wifi also works great on the AP. Come someone please help with why this would be happening?? I have done many of these with same setup and never had this issue. Thank you in Advance!!
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 165
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: Capsman 2 SSID Issue

Mon Aug 24, 2015 10:54 am

Have you added the second ssid provision rules as slave config in capsman?
 
ExtremeInternet
just joined
Topic Author
Posts: 4
Joined: Mon Aug 24, 2015 12:53 am

Re: Capsman 2 SSID Issue

Mon Aug 24, 2015 3:09 pm

Have you added the second ssid provision rules as slave config in capsman?

I tried that also. I went to provisioning tab and both my public and internal wifi are there. I set the public to slave the internal and still didn't work.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Re: Capsman 2 SSID Issue

Tue Aug 25, 2015 11:31 am

please make sure that the Virtual CAP that you added for the master CAP is using different MAC address than the master CAP.

Who is online

Users browsing this forum: petardo and 26 guests