I am using model no 912UAG-5HPnD some days problem is station devices is connect – disconnect


Model : 912UAG-5HPnD
Current firmware : 3.22
Upgrade firmware: 3.19


wireless configure

admin@Office tower AP 2] > interface wireless print
---------------------------------
Flags: X - disabled, R - running
0 R name="wlan2" mtu=1500 mac-address=4C:5E:0C:8E:1B:B9 arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid="NPS_M_2" frequency=5380 band=5ghz-a/n
channel-width=20mhz scan-list=default wireless-protocol=802.11 wds-mode=dynamic wds-default-bridge=bridge1 wds-ignore-ssid=no bridge-mode=enabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=n