Community discussions

MikroTik App
 
krisjanis
MikroTik Support
MikroTik Support
Topic Author
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

The Dude, v6.38rc test builds.

Mon Sep 26, 2016 10:19 am

Changes in v6.38rcX:

*) Added support for The Dude configuration from CLI; (work in progress).
*) Added option to use dns name in smtp server.

All entries below are already confirmed and reported to DEV for fixing.

Higher priority problems:
* Client updater broken.

Lower priority problems:
* Adapt dude link labels to be able to show 10G traffic and larger (snmp part left to fix);

Enhancement requests:
* Add option to use functions and oids in notification messages;
* Add AES encryption method to dude side snmp v3 profiles;
* Add option to configure user in a way to allow access only to certain panels;

Unrelated to v6.38rc builds:
Link to v6.37 web release topic: http://forum.mikrotik.com/viewtopic.php?f=8&t=112598
 
paulct
Member
Member
Posts: 336
Joined: Fri Jul 12, 2013 5:38 pm

Re: The Dude, v6.38rc test builds.

Mon Sep 26, 2016 10:28 am

Hi

Any chance for radius login to the dude?
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: The Dude, v6.38rc test builds.

Mon Sep 26, 2016 10:34 am

Any chance of getting the dude on PPC?
 
jchmelik
just joined
Posts: 9
Joined: Wed May 18, 2016 12:18 pm
Location: Pardubice, Czech Republic

Re: The Dude, v6.38rc test builds.

Tue Sep 27, 2016 10:40 am

CyberTod wrote:

Some variables in notifications seem to be missing, for example :
[Service.Status]
[Service.ProblemDescription]


Thank you. The fix for this will be included in next release.
This is a very serious bug.
This bug means that in fact, notifications not working.
Please give a quick fix.
I don't want to downgrade from version 6.37 to 6.36rcXX (there are many changes associated with DB).
Thank you.
 
saschap
just joined
Posts: 4
Joined: Tue May 21, 2013 4:43 pm
Contact:

Re: The Dude, v6.38rc test builds.

Tue Sep 27, 2016 1:10 pm

+1 Any change for radius login to the dude?
 
facubertran
just joined
Posts: 19
Joined: Sat Sep 24, 2016 4:18 pm
Location: Argentina
Contact:

Re: The Dude, v6.38rc test builds.

Tue Sep 27, 2016 4:44 pm

Permit only login to hesitate, not allowing api, winbox web, etc.

+1 Radius login

Serious problem..
Some variables in notifications seem to be missing, for example :
[Service.Status]
[Service.ProblemDescription]
 
LifeGame
newbie
Posts: 40
Joined: Mon Sep 26, 2016 5:30 pm

Re: The Dude, v6.38rc test builds.

Wed Sep 28, 2016 8:49 pm

Please add

ipsec vpn interface
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Thu Sep 29, 2016 12:47 pm

Can u reproduce this problem
dudebug.png
As u can see on the picture (in label appearance) Dude can read two functions but probe says "time out"
After rebooting Mikrotik Device - where Dude is installed all back to normal for some time

Edit. I inspected the problem, I come to this findings
pic3.png
For some reason Dude stop reading values from device, as u can see on picture values are wrong they are "stuck" at the point where dude probably lost connection to the device but for some reason Dude cant reprobe or cant get new values from the Device
But when I try dabble click on device in RouterOS TAB - Interfaces I can see interfaces as it should be (on ether1 bits are rolling every second as traffic passing by)
pic2.png
That mean Dude have access to the device
After Rebooting Dude server Functions- start reading again and Probes go up again.

Another thing on Device label as u can see two from tree probes are down Device have orange colour as normal but there is no info about 2 probes on label [Device.ServicesDown]

Function are made using ros_command for example "ros_command(":put [/system resource get cpu-load]")" and etc. etc.
You do not have the required permissions to view the files attached to this post.
 
nemke
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Jul 31, 2014 2:52 am

Re: The Dude, v6.38rc test builds.

Thu Sep 29, 2016 9:55 pm

Any chance of getting the dude on PPC?

+1
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Sun Oct 02, 2016 5:21 am

I upgraded from 6.37rc15 to 6.38rc7 and my email notifications doesn't work anymore

i get ERROR SENDING EMAIL: DNS RESOLVE FAILED

it was working before upgrade. My email server is a local smtp server and I put the ip in the SERVER IP field.
i try sending emails with tools/email and it works
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.38rc test builds.

Sun Oct 02, 2016 4:58 pm

Hi!

No client for rc version =(

Please keep at site actual link for newbies.
http://download2.mikrotik.com/routeros/ ... .38rc7.exe
 
Axel
just joined
Posts: 2
Joined: Sun Oct 02, 2016 7:09 pm

Re: The Dude, v6.38rc test builds.

Sun Oct 02, 2016 7:26 pm

Will the Russian language on the client?
 
Ham
just joined
Posts: 18
Joined: Thu Oct 27, 2011 1:27 am

Re: The Dude, v6.38rc test builds.

Mon Oct 03, 2016 4:39 am

Lakis we are having a similar problem, SNMP queries will stop going out from the DUDE server after a short while.

We confirmed that there was no SNMP request leaving the dude server after about 5 minuets of operation, a reboot will get it working again for a short while.

We are running the dude from CHR, are you also running the dude from CHR?
Can u reproduce this problem
dudebug.png

As u can see on the picture (in label appearance) Dude can read two functions but probe says "time out"
After rebooting Mikrotik Device - where Dude is installed all back to normal for some time

Edit. I inspected the problem, I come to this findings

pic3.png
For some reason Dude stop reading values from device, as u can see on picture values are wrong they are "stuck" at the point where dude probably lost connection to the device but for some reason Dude cant reprobe or cant get new values from the Device
But when I try dabble click on device in RouterOS TAB - Interfaces I can see interfaces as it should be (on ether1 bits are rolling every second as traffic passing by)
pic2.png
That mean Dude have access to the device
After Rebooting Dude server Functions- start reading again and Probes go up again.

Another thing on Device label as u can see two from tree probes are down Device have orange colour as normal but there is no info about 2 probes on label [Device.ServicesDown]

Function are made using ros_command for example "ros_command(":put [/system resource get cpu-load]")" and etc. etc.
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Mon Oct 03, 2016 12:08 pm

To Ham
Glad to hear that its not just me, I've searched the source of the problem for days, probably it's just a bug.
I m running my Dude on x86
 
jchmelik
just joined
Posts: 9
Joined: Wed May 18, 2016 12:18 pm
Location: Pardubice, Czech Republic

Re: The Dude, v6.38rc test builds.

Mon Oct 03, 2016 2:43 pm

I have installed 6.38rc7.
Bug with missing some variables in notifications ([Service.Status], [Service.ProblemDescription] etc.) is now fixed.
But there is a new bug - popup and flash notifications not working me. In the previous version (6.37 final) that was okay
 
esmir
just joined
Posts: 10
Joined: Tue Sep 20, 2016 12:45 pm

Re: The Dude, v6.38rc test builds.

Tue Oct 04, 2016 12:50 pm

Permit only login to hesitate, not allowing api, winbox web, etc.

+1 Radius login

Serious problem..
Some variables in notifications seem to be missing, for example :
[Service.Status]
[Service.ProblemDescription]
I have totally the same problems with notifications.

For example:

Subject: device-name-01: Service ping is now [Service.Status]

Content:

Service ping on device-name-01 is now [Service.Status] ([Service.ProblemDescription])
Comment: [Service.NotesCommaList]

Time Last Down: [Service.TimeLastDown]
Time Last Up: [Service.TimeLastUp]

Services on Device (LastStatus):
UP: ping, Ubnt6_ccqHistory, Ubnt6_ccqUnder92, Ubnt6_connections Services DOWN: Ubnt6_ConnectionRateHistory, Ubnt6_ConnectionRateUnder78Mbit
Unstable: http
Unknown:
Acked:
 
szalkerous
newbie
Posts: 35
Joined: Thu Jan 21, 2016 2:30 am
Location: NH, USA

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 2:52 am

ERROR: missing dude-6.37.1-tile.npk (on Current/Stable channel)
ERROR: missing dude-6.38rc8-tile.npk (on Release Candidate channel)
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 4:51 pm

ERROR: missing dude-6.37.1-tile.npk (on Current/Stable channel)
ERROR: missing dude-6.38rc8-tile.npk (on Release Candidate channel)
try now.... 6.38rc9 is available
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 5:33 pm

ERROR: missing dude-6.37.1-tile.npk (on Current/Stable channel)
ERROR: missing dude-6.38rc8-tile.npk (on Release Candidate channel)
you know there are old fashion way of upgrading - downloading packages manually, uploading them to the router and rebooting :)
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 5:49 pm

upgraded to 6.38rc9 ....
can't connect via WINBOX (after login automatically closes)
can connect via ssh
can connect via thedude_client

TheDude email notifications still doesn't work
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 5:52 pm

ERROR: missing dude-6.37.1-tile.npk (on Current/Stable channel)
ERROR: missing dude-6.38rc8-tile.npk (on Release Candidate channel)
you know there are old fashion way of upgrading - downloading packages manually, uploading them to the router and rebooting :)
TheDude package 6.38rc8 download link in the MT website was broken too.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 6:14 pm

 
User avatar
otgooneo
Trainer
Trainer
Posts: 581
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 8:59 pm

Is it possible to upgrade only dude package to 6.38rc on the CCR side?
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 9:10 pm

Is it possible to upgrade only dude package to 6.38rc on the CCR side?
I think it's not possible. All packages must be same version
 
User avatar
otgooneo
Trainer
Trainer
Posts: 581
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: The Dude, v6.38rc test builds.

Wed Oct 05, 2016 10:47 pm

This is release still doesn`t have possibility to add device with mandatory basic values.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 06, 2016 3:01 pm

Thank you all for testing and reporting.
For some reason Dude stop reading values from device - Dude cant reprobe or cant get new values from the Device
These values will keep updating, but it might take some time, we will see if we can improve it.
Another thing on Device label as u can see two from tree probes are down Device have orange colour as normal but there is no info about 2 probes on label [Device.ServicesDown]

Fixed in 6.38rc9
my email notifications doesn't work anymore
i get ERROR SENDING EMAIL: DNS RESOLVE FAILED
Fixed in 6.38rc9
we are having a similar problem, SNMP queries will stop going out from the DUDE server after a short while.
We confirmed that there was no SNMP request leaving the dude server after about 5 minuets of operation
Will try to reproduce the problem.
But there is a new bug - popup and flash notifications not working me.
Reported for fixing.
upgraded to 6.38rc9 ....
can't connect via WINBOX
Reported for fixing.
Is it possible to upgrade only dude package
No you have to update the system package too.
otgooneo:
This is release still doesn`t have possibility to add device with mandatory basic values.
Can you please give more detail ? Could not see any problems with adding devices.
 
kubaver
just joined
Posts: 13
Joined: Tue Sep 20, 2016 3:03 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 06, 2016 4:37 pm

After update to 6.38rc10 still can't connect via WINBOX...
 
User avatar
GreySer
just joined
Posts: 23
Joined: Thu Apr 21, 2016 9:38 am
Location: Cheboksary

Re: The Dude, v6.38rc test builds.

Fri Oct 07, 2016 9:04 am

After update to 6.38rc10 still can't connect via WINBOX...
Me too :(. support says - Must remove dude server from mikrotik, when winbox is works.
 
kubaver
just joined
Posts: 13
Joined: Tue Sep 20, 2016 3:03 pm

Re: The Dude, v6.38rc test builds.

Fri Oct 07, 2016 2:29 pm

After update to 6.38rc10 still can't connect via WINBOX...
Me too :(. support says - Must remove dude server from mikrotik, when winbox is works.
But just Dude server is the reason for my testing rc versions :-)
Eagerly I await the opportunity to place an one object on several maps (or move object on other map without lost their history data).
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 13, 2016 12:40 pm

6.38rc14 (Release candidate)

my requests

1. all alerts that have occurred in non-active time for such notifications for example between 00:00-08:00, should be added to the queue and be send at the beginning of an active time. If by that time the service started to function, the notification shall be removed from the queue.
alert_email.png
2. If the main map contains several submaps, and added there devices are set depending on (parents), and when the device is not working in the tree above, I should get one notification about device failure which is highest on the tree even if it is on a different submap. Now i have many alerts. Maybe I have problem configuration of the DUDE?
not.png
not_10.png
You do not have the required permissions to view the files attached to this post.
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 13, 2016 1:01 pm

asking for adding zoom settings for each of the charts separately or finally for the all charts one settings.
chart.png
I keep my fingers crossed for your good work. ;)
You do not have the required permissions to view the files attached to this post.
 
User avatar
laguten
just joined
Posts: 3
Joined: Wed Sep 21, 2016 5:59 pm
Contact:

Re: The Dude, v6.38rc test builds.

Mon Oct 17, 2016 2:16 pm

Will the Telegram notification support?
 
derr12
Member
Member
Posts: 411
Joined: Fri May 01, 2009 11:32 pm

Re: The Dude, v6.38rc test builds.

Wed Oct 19, 2016 1:41 am

any progress on the notifications bug?

Service ping on x is now [Service.Status] ([Service.ProblemDescription])
 
DaveBrowning
just joined
Posts: 11
Joined: Tue May 05, 2015 12:33 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 20, 2016 9:35 am

Just upgraded to 6.38rc15

Radius user login = "radius authentication is not supported for old challenges"

Also, when logged in as standard user. Screen flickers and jumps between maps.

What gives?
 
sparker
just joined
Posts: 23
Joined: Mon Jan 23, 2012 5:48 pm
Location: Russia / Chelyabinsk

Re: The Dude, v6.38rc test builds.

Sun Oct 23, 2016 10:54 am

+1 Radius Login problem
 
claymen
just joined
Posts: 1
Joined: Tue Oct 25, 2016 12:47 am

Re: The Dude, v6.38rc test builds.

Tue Oct 25, 2016 12:54 am

Please add in notifications any metod to post messages
/fetch from Router os
/tool fetch url=”https://api.telegram.org/bot153358077:A ... unnel_DOWN” keep-result=no
or native telegram support (https://1spla.ru/blog/telegram_bot_for_mikrotik/)
is it really so difficult?

Great monitor but can not notify anybody.

Thanks for you WORK.
 
User avatar
laguten
just joined
Posts: 3
Joined: Wed Sep 21, 2016 5:59 pm
Contact:

Re: The Dude, v6.38rc test builds.

Tue Oct 25, 2016 7:18 pm

Please add in notifications any metod to post messages
/fetch from Router os
/tool fetch url=”https://api.telegram.org/bot153358077:A ... unnel_DOWN” keep-result=no
or native telegram support (https://1spla.ru/blog/telegram_bot_for_mikrotik/)
is it really so difficult?

Great monitor but can not notify anybody.

Thanks for you WORK.
Thanks for you advice! It is not really so difficult and I've done it before my question. But I interested by telegram notifications from The Dude. I think that for this advantage would be enough add functionality /fetch to The Dude.
May be it very difficult for developers... (?)
 
chizh
just joined
Posts: 1
Joined: Wed Oct 26, 2016 10:44 am

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 10:46 am

Any chance of getting the dude on PPC?
+1
 
krisjanis
MikroTik Support
MikroTik Support
Topic Author
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 2:09 pm

Changes for builds up to v6.38rc19:

*) Added - AES encryption method for snmp v3
*) Added - Dude configuration interface in Winbox (Requires latest Winbox version 3.7)
*) Added - Dude configuration interface in Webfig
** Maps are view-able in web mode.
*) Agents - Now any RouterOS device can be used as The Dude agent. It no longer requires
server package and ROS login. THIS FEATURE BECOMES AVAILABLE STARTING WITH v6.37rc18
*) Agents - Old agent section removed from client.
*) Fixed - Bandwidth test tool. (broken since v6.37)
*) Fixed - Auto-discovery was adding devices with non-usable characters in name field.
*) Fixed - SNMP server didn't work without dns name. (broken since v6.38rcX)
*) Fixed - Some notification types:(flash, popup, log event) didn't work properly. (broken since v6.38rcX)
*) Fixed - Fixed some issues with client where menus didn't display correctly at first access after upgrade. (broken since v6.38rcX)
*) Fixed - It wasn't possible to delete some elements from network map. (broken since v6.38rcX)
*) Fixed - Default variable [Device.RosVersion] didn't return correct value. (broken since v6.38rcX)
*) Fixed - Issues with link not changing color when traffic grows.
*) Fixed - It wasn't possible to open multiple simultaneous panels. (broken since v6.38rcX)
*) Some improvements for DB data write in store.

PS. to use ROS device as agent you do need to have valid user login and "Router OS" check-box marked.
 
raffav
Member
Member
Posts: 345
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 3:56 pm

testing the winbox dude session
on device i put a mk device and iam getting connect failed: Connection refused(111)

EDIT:
find it, winbox port

i cant understand way it is still not possible to set the on witch port Dude need to connect,
Last edited by raffav on Wed Oct 26, 2016 4:14 pm, edited 1 time in total.
 
mmandrino
just joined
Posts: 20
Joined: Fri Jan 02, 2015 4:32 pm

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 4:00 pm

Hi,

I am running Dude on CHR - v 6.37.1 now, and looking for futher updates.

Here are the issues so far:

- Slow response when double clicking on device - changing Agents from default to server speeds up to no delay, but we are not using Agents now, so default should be server ?
- Users in read only mode cannot change own passwords
 
krisjanis
MikroTik Support
MikroTik Support
Topic Author
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 4:29 pm

testing the winbox dude session
on device i put a mk device and iam getting connect failed: Connection refused(111)
EDIT:
find it, winbox port i cant understand way it is still not possible to set the on witch port Dude need to connect,
Because server is now using winbox port. It no longer has separate port to access.
Hi,
I am running Dude on CHR - v 6.37.1 now, and looking for futher updates.
Here are the issues so far:
- Slow response when double clicking on device - changing Agents from default to server speeds up to no delay, but we are not using Agents now, so default should be server ?
- Users in read only mode cannot change own passwords
1. Is this CHR still using free license level? Usually with CHR / The Dude setups with free license level the 1Mbps limit on interface is causing that Client/Server performance issues.
2. Which exact password do you mean?
 
mmandrino
just joined
Posts: 20
Joined: Fri Jan 02, 2015 4:32 pm

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 4:39 pm

testing the winbox dude session
on device i put a mk device and iam getting connect failed: Connection refused(111)
EDIT:
find it, winbox port i cant understand way it is still not possible to set the on witch port Dude need to connect,
Because server is now using winbox port. It no longer has separate port to access.
Hi,
I am running Dude on CHR - v 6.37.1 now, and looking for futher updates.
Here are the issues so far:
- Slow response when double clicking on device - changing Agents from default to server speeds up to no delay, but we are not using Agents now, so default should be server ?
- Users in read only mode cannot change own passwords
1. Is this CHR still using free license level? Usually with CHR / The Dude setups with free license level the 1Mbps limit on interface is causing that Client/Server performance issues.
2. Which exact password do you mean?
No, we have P1 full licence.
Also after a connection breakes (VPN, wireless) the users cannot login, and CPU spikes until broken connection timeouts!!!! Winbox or dude cannot login!!

I mean user password for dude login / we setup password for users but would like to let them have option to change from client (users with dude access no winbox)
 
raffav
Member
Member
Posts: 345
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.38rc test builds.

Wed Oct 26, 2016 4:40 pm

testing the winbox dude session
on device i put a mk device and iam getting connect failed: Connection refused(111)
EDIT:
find it, winbox port i cant understand way it is still not possible to set the on witch port Dude need to connect,
Because server is now using winbox port. It no longer has separate port to access.
Yes i know but i dont use default winobox port 8291 for security reason it will be very nice to be possible to tell dude on witch winbox port connect
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 27, 2016 2:32 pm

Lakis we are having a similar problem, SNMP queries will stop going out from the DUDE server after a short while.

We confirmed that there was no SNMP request leaving the dude server after about 5 minuets of operation, a reboot will get it working again for a short while.

We are running the dude from CHR, are you also running the dude from CHR?
Can u reproduce this problem
dudebug.png

As u can see on the picture (in label appearance) Dude can read two functions but probe says "time out"
After rebooting Mikrotik Device - where Dude is installed all back to normal for some time

Edit. I inspected the problem, I come to this findings

pic3.png
For some reason Dude stop reading values from device, as u can see on picture values are wrong they are "stuck" at the point where dude probably lost connection to the device but for some reason Dude cant reprobe or cant get new values from the Device
But when I try dabble click on device in RouterOS TAB - Interfaces I can see interfaces as it should be (on ether1 bits are rolling every second as traffic passing by)
pic2.png
That mean Dude have access to the device
After Rebooting Dude server Functions- start reading again and Probes go up again.

Another thing on Device label as u can see two from tree probes are down Device have orange colour as normal but there is no info about 2 probes on label [Device.ServicesDown]

Function are made using ros_command for example "ros_command(":put [/system resource get cpu-load]")" and etc. etc.
Sorry for been annoying
This is not fixed yet
If Dude lose connection to Some device, device go red - normal but values like cpu, mem are stuck showing last value on device appearance
When device is on-line again, dude ping service is up but other SNMP services are down (timeout). I tried Reprobe - not helping
Only when I reboot Dude Server all service are up again.
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Thu Oct 27, 2016 3:46 pm

Changes for builds up to v6.38rc19:

*) Added - AES encryption method for snmp v3
*) Added - Dude configuration interface in Winbox (Requires latest Winbox version 3.7)
*) Added - Dude configuration interface in Webfig
** Maps are view-able in web mode.
*) Agents - Now any RouterOS device can be used as The Dude agent. It no longer requires
server package and ROS login. THIS FEATURE BECOMES AVAILABLE STARTING WITH v6.37rc18
*) Agents - Old agent section removed from client.
*) Fixed - Bandwidth test tool. (broken since v6.37)
*) Fixed - Auto-discovery was adding devices with non-usable characters in name field.
*) Fixed - SNMP server didn't work without dns name. (broken since v6.38rcX)
*) Fixed - Some notification types:(flash, popup, log event) didn't work properly. (broken since v6.38rcX)
*) Fixed - Fixed some issues with client where menus didn't display correctly at first access after upgrade. (broken since v6.38rcX)
*) Fixed - It wasn't possible to delete some elements from network map. (broken since v6.38rcX)
*) Fixed - Default variable [Device.RosVersion] didn't return correct value. (broken since v6.38rcX)
*) Fixed - Issues with link not changing color when traffic grows.
*) Fixed - It wasn't possible to open multiple simultaneous panels. (broken since v6.38rcX)
*) Some improvements for DB data write in store.

PS. to use ROS device as agent you do need to have valid user login and "Router OS" check-box marked.
Great move! So I guess winbox will be dude client.
 
User avatar
9939781
Member Candidate
Member Candidate
Posts: 103
Joined: Tue Jun 14, 2011 6:42 am

Re: The Dude, v6.38rc test builds.

Fri Oct 28, 2016 9:06 am

my ccr1072 have a lots of ip-mac info.but i not need it.i need dude show ccr1072 interface traffic only.becouse show the ip-mac and the other will use more cpu,and i found ccr1072 one core 100% always.i need dude show interface traffic only,
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Fri Oct 28, 2016 10:34 am

raffav wrote:
Yes i know but i dont use default winobox port 8291 for security reason it will be very nice to be possible to tell dude on witch winbox port connect
You can specify probe port under device settings => Services => routeros mangement => Probe Port
Lakis wrote:
If Dude lose connection to Some device, device go red - normal but values like cpu, mem are stuck showing last value on device appearance
When device is on-line again, dude ping service is up but other SNMP services are down (timeout). I tried Reprobe - not helping
Only when I reboot Dude Server all service are up again.
Latest RC versions have improvements for label refresh, when device is not reachable,
so you should not see [device_performance()] when the host is down. When the host is up, the snmp probes will start to refresh after few minutes.
9939781 wrote:
my ccr1072 have a lots of ip-mac info.but i not need it.i need dude show ccr1072 interface traffic only.becouse show the ip-mac and the other will use more cpu,and i found ccr1072 one core 100% always.i need dude show interface traffic only,
It's also possible to disable SNMP under device => General => Snmp Profile => no-snmp, for interface traffic you can use Mastering Type - Routeros
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Fri Oct 28, 2016 12:38 pm

Lakis wrote:
If Dude lose connection to Some device, device go red - normal but values like cpu, mem are stuck showing last value on device appearance
When device is on-line again, dude ping service is up but other SNMP services are down (timeout). I tried Reprobe - not helping
Only when I reboot Dude Server all service are up again.
Latest RC versions have improvements for label refresh, when device is not reachable,
so you should not see [device_performance()] when the host is down. When the host is up, the snmp probes will start to refresh after few minutes.

Yes I know it should work like that, as it works in v3.6, ok maybe I am wrong in something I'll rebuild new test map and observe, in meantime if somebody has same experience please inform.
Thanks.

edited: Yes SNMP are working (with big delay) but Functions with ros command's are not, after dude failed to reach device
simple Dude can't get from device ros_command(":put [/system resource get cpu-load]") or ros_command(":put [/system healt get voltage] and etc.
but on map in device RouterOS TAB I can see that dude has access. After reboot dude start to read values using ros_command
can you reproduce this problem?
 
raffav
Member
Member
Posts: 345
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.38rc test builds.

Fri Oct 28, 2016 3:55 pm

You can specify probe port under device settings => Services => routeros mangement => Probe Port
sorry but i didn't find it or understand well
 
User avatar
9939781
Member Candidate
Member Candidate
Posts: 103
Joined: Tue Jun 14, 2011 6:42 am

Re: The Dude, v6.38rc test builds.

Sat Oct 29, 2016 4:07 am

9939781 wrote:
my ccr1072 have a lots of ip-mac info.but i not need it.i need dude show ccr1072 interface traffic only.becouse show the ip-mac and the other will use more cpu,and i found ccr1072 one core 100% always.i need dude show interface traffic only,
It's also possible to disable SNMP under device => General => Snmp Profile => no-snmp, for interface traffic you can use Mastering Type - Routeros[/quote]

thank for your reply.if that,the dude will use winbox mode login.but i can not let dude user to login winbox.so have a the other solve plan?
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Mon Oct 31, 2016 11:07 am

I have some problems with the dude client and window tiles.

I normaly use a 3 pane layout. One is the map where I click thru on the bottom, and two panes at the top with active outages and with chart of our uplinks.
Making the tiles at the top somtimes work, sometimes not. Reopening the panel the upper two tiles are empty.
Under Panels there are 2 with IP Address of client. Tried to remove them but both are claimed to be used. I have only one client connected.

Dude runs on CCR/6.38rc19 client is Win10.
 
tberg
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Sun Sep 22, 2013 6:34 pm

Re: The Dude, v6.38rc test builds.

Mon Oct 31, 2016 10:42 pm

The Snmpwalk tool appears to not work with 6.38rc19. I've tried on a number of devices and get a timeout for all of them. All of these devices have various SNMP services working correctly. Snmpwalk was working with 6.37.
 
User avatar
ilunne
just joined
Posts: 12
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.38rc test builds.

Mon Oct 31, 2016 11:10 pm

The Snmpwalk tool appears to not work with 6.38rc19. I've tried on a number of devices and get a timeout for all of them. All of these devices have various SNMP services working correctly. Snmpwalk was working with 6.37.
here too
Image
 
tberg
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Sun Sep 22, 2013 6:34 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 01, 2016 4:35 pm

More info. SNMP values are being collected and displayed correctly in appearance and SNMP tab of device. It is just snmpwalk tool that times out.
dude_snmp.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 03, 2016 5:07 pm

New release candidate version (6.38rc24) is available!
http://www.mikrotik.com/download

Changes since v6.38rc19:

*) Removed - Link label will not change colour on link speed change.
*) Fixed - Allow users without FTP policy to connect to dude server (access to files will be restricted).
*) Fixed - Discovery stayed in "finishing" status.
*) Fixed - Devices showed device_performance even if the host were down.
*) Fixed - Snmpwalk were broken on X86 devices.
*) Fixed - History charts was flapping if the monitored device were down.
*) Fixed - v4 backup import fail.
*) Fixed - Multi-core devices showed CPU usage only from one core.

939781 wrote:
"if that,the dude will use winbox mode login.but i can not let dude user to login winbox.so have a the other solve plan?"

You can create a new user group with policies=read,dude, and add new user to this group. So this user will not be able to connect to your RouterOS.
 
User avatar
ilunne
just joined
Posts: 12
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 12:00 am

Dude server package is offline
2016-11-03 (4).png
You do not have the required permissions to view the files attached to this post.
 
User avatar
yarda
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Tue May 22, 2007 4:58 pm
Location: Czech Republic - Southern Bohemia
Contact:

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 12:37 pm

 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 1:37 pm

Thanks for reporting, links are updated now.
http://www.mikrotik.com/download
 
raffav
Member
Member
Posts: 345
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 1:46 pm

Hello, i still trying to figure out how i can make the dude server to read RouterOS info on a RB device that dont use the default Winbox Port
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 1:57 pm

Hello, i still trying to figure out how i can make the dude server to read RouterOS info on a RB device that dont use the default Winbox Port
There are two opttions available to read RouterOS info:
1) Use default Winbox port.
2) Make firewall NAT rule on your monitored RouterOS device, to redirect the dude server form default Winbox port to your custom Winbox port.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 2:32 pm

2) Make firewall NAT rule on your monitored RouterOS device, to redirect the dude server form default Winbox port to your custom Winbox port.
isn't that visually the same as NOT changing winbox port? :)
 
raffav
Member
Member
Posts: 345
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 3:06 pm

Hello, i still trying to figure out how i can make the dude server to read RouterOS info on a RB device that dont use the default Winbox Port
There are two opttions available to read RouterOS info:
1) Use default Winbox port.
2) Make firewall NAT rule on your monitored RouterOS device, to redirect the dude server form default Winbox port to your custom Winbox port.

thanks
 
danayalop
just joined
Posts: 6
Joined: Tue Feb 02, 2016 2:51 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 04, 2016 9:04 pm

Changes since v6.38rc19:

*) Removed - Link label will not change colour on link speed change.
I understand then that the labels will become ever more to change color to increase traffic? It was a very useful tool when maps are minimized.
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Sat Nov 05, 2016 12:09 pm

ver rc24, I tested and retested Services, probes finally are working correctly, also some device appearance issues are fixed - please don't brake it :).


I have demand if its possible to be added wireless access list TAB in device RouterOS TAB?
Also probably there is a reason why upload is disabled, when will be re enabled?
 
User avatar
ilunne
just joined
Posts: 12
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.38rc test builds.

Sun Nov 06, 2016 3:27 pm

Captura de Tela (71).png
I created a skin to allow certain User web access only to network maps. It worked well, however, I noticed that after logging, displays the list of dude files, which in this case should not be allowed by the skin. I wish this were checked. Also, I would like a feature was added: Ability to define groups for network maps, so, too, be feasible through a skin and also the dude client, allow certain users to interact only with the maps in one or ais groups selected.

My Skin File:
{
    'Quick Set': 0,
    CAPsMAN: 0,
    Wireless: 0,
    Interfaces: 0,
    PPP: 0,
    Bridge: 0,
    Mesh: 0,
    IP: 0,
    MPLS: 0,
    Routing: 0,
    System: 0,
    Queues: 0,
    Files: 0,
    Log: 0,
    Radius: 0,
    'New Terminal': 0,
    Tools: 0,
    Dude: {
        Devices: 0,
        Functions: 0,
        Links: 0,
        Mibs: 0,
        'Network Maps': {
            'Network Map Elements': 0,
            Discoveries: 0,
            'Network Map': {
                '&': { remove: 0, set: 0, name: 'Mapa da Rede:', title: 'Mapas de Rede' },
                General: {
                    'Default Zoom': 0,
                    Status: 0,
                    tab: 'Imagem',
                    Name: { ro: true, name: 'Nome:' }
                },
                Polling: {
                    Enabled: 0,
                    'Probe Interval': 0,
                    'Probe Timeout': 0,
                    'Probe Down Count': 0,
                    'Use Notifications': 0,
                    Notifications: 0
                },
                Appearance: {
                    'Label Refresh Interval': 0,
                    Background: 0,
                    Device: 0,
                    Network: 0,
                    Submap: 0,
                    Static: 0,
                    Link: 0
                },
                Color: 0,
                Image: 0,
                Scale: 0,
                Tile: 0,
                Label: 0,
                'Link Color': 0,
                'Link Full Color': 0,
                'Link Label Color': 0,
                Thickness: 0
            },
            name: 'MAPAS'
        },
        Networks: 0,
        Notifications: 0,
        Probes: 0,
        'RouterOS Info': 0,
        'SNMP Profiles': 0,
        'Server Config': 0,
        Services: 0,
        Settings: 0,
        'Syslog Rules': 0,
        Tools: 0,
        Charts: {
            Chart: {
                Name: { ro: true }
            },
            'Chart Line': 0,
            'Data Source': 0,
            name: 'GRAFICOS'
        }
    },
    'Make Supout.rif': 0,
    Undo: 0,
    Redo: 0,
    'Hide Menu': 0,
    'Hide Passwords': 0,
    'Safe Mode': 0,
    Manual: 0,
    License: 0,
    Graphs: 0
}
You do not have the required permissions to view the files attached to this post.
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Mon Nov 07, 2016 9:14 pm

SNMP still doesn't work work for me... i can't get some devices values via snmp
i'm using v6.38rc25
Image
 
User avatar
ilunne
just joined
Posts: 12
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.38rc test builds.

Mon Nov 07, 2016 10:25 pm

Hi, switch to snmpv2, try it.
Here work when i change
SNMP still doesn't work work for me... i can't get some devices values via snmp
i'm using v6.38rc25
Image
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Mon Nov 07, 2016 10:45 pm

Hi, switch to snmpv2, try it.
Here work when i change
i switch to snmpv2 and i had to restart switch and now it works...thank you,
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 08, 2016 12:05 pm

Hi, switch to snmpv2, try it.
Here work when i change
i switch to snmpv2 and i had to restart switch and now it works...thank you,

Its not your job, but how did you upload pictures?
 
User avatar
ilunne
just joined
Posts: 12
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.38rc test builds.

Tue Nov 08, 2016 7:08 pm

Its not your job, but how did you upload pictures?
FTP, or Winbox
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Tue Nov 08, 2016 7:39 pm

Its not your job, but how did you upload pictures?
Pictures in the dude?
Used to upload vía thedude client, but now it's only possible via winbox or ftp... or SMB too
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 09, 2016 3:52 pm

Its not your job, but how did you upload pictures?
Pictures in the dude?
Used to upload vía thedude client, but now it's only possible via winbox or ftp... or SMB too
Thanks, yes I can upload via Winbox or FTP but the problem for example how do I place some picture in dude/files/default/images dir so I can use it in dude client
For Example: I try to upload via Winbox picture "omnitik.png" directly in dude/files/default/images nothing happens
I can upload picture to / dir but when I try to move it to dude/files/default/images I receive Couldn't change file <omnitik.png> action failed (6)?
 
tberg
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Sun Sep 22, 2013 6:34 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 09, 2016 4:54 pm

Try putting the image files in the dude/files/images dir. Mibs go in the dude/files/mibs dir. I found it much easier to use ftp than Winbox.
 
krisjanis
MikroTik Support
MikroTik Support
Topic Author
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 09, 2016 5:20 pm

Default dir in files is now automatically generated by server. It creates symlinks there of default files(img, mib, etc). This way it easier to avoid corrupted default server content and also it pretty much saves space that way.

Your custom files can be stored in files dir or any sub-dir that you create there.
 
User avatar
amt
Long time Member
Long time Member
Posts: 529
Joined: Fri Jan 16, 2015 2:05 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 10, 2016 7:48 am

Hi All,

I upgrade dude to V6.38rc25 and now when i click on devices and select router os, almost all device gives this error " std failure: not allowed (9), next attempt at Nov/10 10:28:56 " and dude cant log in to devices so i cant see the graphs also. what can be the problem ?

Thanks
 
krisjanis
MikroTik Support
MikroTik Support
Topic Author
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 10, 2016 11:09 am

Hi All,
I upgrade dude to V6.38rc25 and now when i click on devices and select router os, almost all device gives this error " std failure: not allowed (9), next attempt at Nov/10 10:28:56 " and dude cant log in to devices so i cant see the graphs also. what can be the problem ?
ROS login seems to be working ok with lab devices w/ rc25 server.

1. Is login credentials correct in device settings?
2. On monitored device in group policy winbox and dude policies should be makred otherwise server wont be able to access the device
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 11, 2016 12:22 am

Try putting the image files in the dude/files/images dir. Mibs go in the dude/files/mibs dir. I found it much easier to use ftp than Winbox.
x86 /dude/files/ dir it works thanks
 
User avatar
amt
Long time Member
Long time Member
Posts: 529
Joined: Fri Jan 16, 2015 2:05 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 11, 2016 11:38 am

Hi All,
I upgrade dude to V6.38rc25 and now when i click on devices and select router os, almost all device gives this error " std failure: not allowed (9), next attempt at Nov/10 10:28:56 " and dude cant log in to devices so i cant see the graphs also. what can be the problem ?
ROS login seems to be working ok with lab devices w/ rc25 server.

1. Is login credentials correct in device settings?
2. On monitored device in group policy winbox and dude policies should be makred otherwise server wont be able to access the device
Hi,

login credentials are correct in device settings, when i select winbox from tool menu of dude , i can enter to the device without problem. before upgrade there was no problem. also On monitored device in group policy winbox and dude policies makred
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Fri Nov 11, 2016 9:24 pm

Hello, I upgraded from 6.37.1 to 6.38rc29 and moved from CCR router to vSphere x86 CHR VM because of continuous restarts of Dude caused by CPU and memory exhaustion.

The CPU and memory utilization now seems ok, but I found few annoying bugs:
- color gradation of stressed links and link labels not working
- status flags of network maps in left tree contents panel are missing
- snmp walk tool not working
- drag&drop file transfers between PC and Dude not working in either direction

While upgrading RouterOS to v6.38rc29 I also noticed that SMB server implementation on RouterOS is broken as my automated DudeDB backups started to fail.

What I would also really appreciate in new Dude version:
- ability to filter snmp oid arrays by regular expressions in Dude functions (or at least by substring match)
- support of live db backup (or ability to export Dude configuration with no history data), whithout needing to stop the Dude server
 
cgaspar
just joined
Posts: 11
Joined: Thu Jul 14, 2016 9:29 pm

Re: The Dude, v6.38rc test builds.

Sat Nov 12, 2016 3:07 pm

Hello, I've updated The Dude to 6.38rc29 version and the e-mail notification is not working. Any changes with the variables at all?

{ Body: Service [Probe.Name] on [Device.Name] is now [Service.Status] ([Service.ProblemDescription]) }
 
User avatar
kolorasta
Member
Member
Posts: 304
Joined: Sun Jun 25, 2006 11:55 pm
Location: Argentina

Re: The Dude, v6.38rc test builds.

Sun Nov 13, 2016 4:12 pm

Hello, I've updated The Dude to 6.38rc29 version and the e-mail notification is not working. Any changes with the variables at all?

{ Body: Service [Probe.Name] on [Device.Name] is now [Service.Status] ([Service.ProblemDescription]) }
Hi. Email notifications are working fine here. I use rc29. Variables used to be broken en previous rc versions. Since rc20 approx they are working fine.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Mon Nov 14, 2016 9:41 am

Changes since v6.38rc25:

*) Fixed - Error on dude RADIUS authentication.
*) Fixed - In some setups dude server caused memory leak on X86/CHR.
*) Added - Dude server now supports spectral scan up to 7Ghz.



Hello, I upgraded from 6.37.1 to 6.38rc29 and moved from CCR router to vSphere x86 CHR VM because of continuous restarts of Dude caused by CPU and memory exhaustion.

The CPU and memory utilization now seems ok, but I found few annoying bugs:
- color gradation of stressed links and link labels not working
- status flags of network maps in left tree contents panel are missing
- snmp walk tool not working
- drag&drop file transfers between PC and Dude not working in either direction

While upgrading RouterOS to v6.38rc29 I also noticed that SMB server implementation on RouterOS is broken as my automated DudeDB backups started to fail.

What I would also really appreciate in new Dude version:
- ability to filter snmp oid arrays by regular expressions in Dude functions (or at least by substring match)
- support of live db backup (or ability to export Dude configuration with no history data), whithout needing to stop the Dude server
Starting from 6.38.X link labels will no more change colour. Link itself changes colour depending on the link rate, and actual link traffic.
File transfers using dude have been disabled, instead you can use Winbox, Webfig or ftp.
Snmpwalk will be fixed in next rc version.

Can you please specify, what you want to achieve using snmp oid regex filtering ?

Quick tests didn't show any problems with SMB server on the latest RouterOS. Can you please give us more details about this issue ?
Also didn't found problems using email notifications on 6.38rc29
 
User avatar
amt
Long time Member
Long time Member
Posts: 529
Joined: Fri Jan 16, 2015 2:05 pm

Re: The Dude, v6.38rc test builds.

Mon Nov 14, 2016 2:29 pm

Problem Continue also on V6.38rc29.. dude cant login devices and gives same error. but from dude we can enter devices from tool>>winbox
You do not have the required permissions to view the files attached to this post.
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Mon Nov 14, 2016 6:53 pm

Starting from 6.38.X link labels will no more change colour. Link itself changes colour depending on the link rate, and actual link traffic.
File transfers using dude have been disabled, instead you can use Winbox, Webfig or ftp.
Snmpwalk will be fixed in next rc version.

Can you please specify, what you want to achieve using snmp oid regex filtering ?

Quick tests didn't show any problems with SMB server on the latest RouterOS. Can you please give us more details about this issue ?
Also didn't found problems using email notifications on 6.38rc29
Thank you for explanation.

With snmp oid array filtering I would be able to monitor values in sub-arrays, which I can't now (array_find with array_element gives me just first occurrence in array). For example I need to count particular process instances on server, or to sum up disk space of particular data storage type on vSphere server, e.g. based on volume name prefix "/vmfs/volumes/x.*".

About SMB problems: I have only one SMB share, configured as hidden ("share$"), and one user with RO rights and simple password. When I connect to this share for the first time after RouterOS reboot, connection succeeds from Windows client, but then when I try to mount that same share from linux machine, this times out with message "mount error 112 = Host is down". After that I'm not able to connect to share from any other host. I do not have FW configured on RouterOS, and this share just worked fine on v6.37.1.
 
User avatar
FlavioCamacho
Trainer
Trainer
Posts: 33
Joined: Tue Jun 24, 2014 7:39 am
Location: Rio de Janeiro - Brasil
Contact:

Re: The Dude, v6.38rc test builds.

Mon Nov 14, 2016 10:31 pm

Hi

Any chance for radius login to the dude and back the WebServer on port 80?

Att.
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 15, 2016 1:35 pm

The Dude does not save any data after reboot on HEXgr3 neither on flash nor on the SDcard. After reboot the SD "disk1" becomes "disk2" if Dude is installed on it. If you change Dude path to "disk2" then the name of the SDcard would again becomes "disk1" after another reboot.. It is like a hell... I couldn't save any data on Dude after RB reboot.. What is it? The OS version is 6.38RC25
PS... On 6.37.1 - the same dulls

On this it was answered here - http://forum.mikrotik.com/viewtopic.php ... 90#p567650 as everyone in Mikrotik knows about this, but nothing is changed in the new releases...
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Wed Nov 16, 2016 11:37 am

Is there a changelog for 6.38rc31? Or nothing have been changed?
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 16, 2016 1:56 pm

Changes since v6.38rc29:

*) Fixed - Snmpwalk was broken starting from 6.38rc27
*) Fixed - Dude db-import failed if dude wasn't enabled

amt - such error is showed if the connection is restricted from the router side, I wasn't able to reproduce such problem, maybe it's because of monitored device configuration. If monitored device is RouterOS, please send us the supout file from it.
support@mikrotik.com

strzinek - we have found possible bug for SMB related problem, it's now reported.

FlavioCamacho - currently it's possible to monitor / manage dude using web interface through webfig tool.

maxkrok - thanks, this issue is known, and also reported.
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Wed Nov 16, 2016 4:34 pm

Thank you for correcting the snmpwalk.

I found other bug in rc31: missing graph captions in device history panel.
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 16, 2016 5:27 pm

MMIPS (RB750gr3)
In 6.38rc30 you can add custom files (images, font,etc) into dude dir tree using winbox (when dude is stopped) and in 6.38rc31 you cannot. I'm back to 6.38rc30. The sdcard disk1 | disk2 mess is still a headache during reboot and if dude is running when rebooting... Please make available adding custom files to dude dir tree using dude client.
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 8:35 am

Please, fix dude, i cant connect to dude server since 6.37.
When i connect - it says me "getting stuff" , client rx becomes about 10MBps and then goes to 300-600 kbps and stays on login page. I update to RC 6.38rc31 - same here. Seems you fix autoupdate but still wont show me DUDE. Stuck on login.

What should i do?
 
User avatar
leoktv
Trainer
Trainer
Posts: 144
Joined: Thu Dec 01, 2005 1:39 pm
Location: sweden
Contact:

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 8:57 am

Please, fix dude, i cant connect to dude server since 6.37.
When i connect - it says me "getting stuff" , client rx becomes about 10MBps and then goes to 300-600 kbps and stays on login page. I update to RC 6.38rc31 - same here. Seems you fix autoupdate but still wont show me DUDE. Stuck on login.

What should i do?
I got the same problem after upgrading to rc31 from rc25.
i did a snapshot on the VM before but eaven after reverting back to rc25 i get the same problem. any ide to the problem.
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 9:13 am

Please, fix dude, i cant connect to dude server since 6.37.
When i connect - it says me "getting stuff" , client rx becomes about 10MBps and then goes to 300-600 kbps and stays on login page. I update to RC 6.38rc31 - same here. Seems you fix autoupdate but still wont show me DUDE. Stuck on login.

What should i do?
I got the same problem after upgrading to rc31 from rc25.
i did a snapshot on the VM before but even after reverting back to rc25 i get the same problem. any ide to the problem.
I get some workaround and here: i delete dude, delete files. Install clean dude and can connect. So reason - dude db. How we can debug it? May be some files are corrupted or language or encoding? I have dude since 3 version with Russian language.
 
User avatar
leoktv
Trainer
Trainer
Posts: 144
Joined: Thu Dec 01, 2005 1:39 pm
Location: sweden
Contact:

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 11:58 am

Please, fix dude, i cant connect to dude server since 6.37.
When i connect - it says me "getting stuff" , client rx becomes about 10MBps and then goes to 300-600 kbps and stays on login page. I update to RC 6.38rc31 - same here. Seems you fix autoupdate but still wont show me DUDE. Stuck on login.

What should i do?
I got the same problem after upgrading to rc31 from rc25.
i did a snapshot on the VM before but even after reverting back to rc25 i get the same problem. any ide to the problem.
I get some workaround and here: i delete dude, delete files. Install clean dude and can connect. So reason - dude db. How we can debug it? May be some files are corrupted or language or encoding? I have dude since 3 version with Russian language.
This did not help i also delited all registry entrys left behind but no luck.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 1:23 pm

Thank you for correcting the snmpwalk.

I found other bug in rc31: missing graph captions in device history panel.
Very good, thanks, and can you please clarify, is this problem only in device pop-up window (history graphs), or you also see the same in device > history charts ? Seems like there is issue only if some service is down on monitored device.

maxkrok - This is known issue, and it's in our priority list.

denser and leoktv - Please generate a supout file from the dude server, and send it with description to support@mikrotik.com. We will try to reproduce and fix it.
 
User avatar
flaviojunior
Trainer
Trainer
Posts: 21
Joined: Thu Nov 17, 2016 6:27 pm
Location: Brazil
Contact:

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 6:31 pm

The changes with syslog are not good!!
We need to separete the log from each router and save the file for like one month!!
Return the syslog like it was is better.
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Thu Nov 17, 2016 7:09 pm

Very good, thanks, and can you please clarify, is this problem only in device pop-up window (history graphs), or you also see the same in device > history charts ? Seems like there is issue only if some service is down on monitored device.
This happens to me only in device history charts panel, not in pop-up window. And only sometimes, so it might be related to some device state.
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 18, 2016 7:37 am

denser and leoktv - Please generate a supout file from the dude server, and send it with description to support@mikrotik.com. We will try to reproduce and fix it.
Thankyou, sent info.
 
User avatar
leoktv
Trainer
Trainer
Posts: 144
Joined: Thu Dec 01, 2005 1:39 pm
Location: sweden
Contact:

Re: The Dude, v6.38rc test builds.

Fri Nov 18, 2016 9:10 am


denser and leoktv - Please generate a supout file from the dude server, and send it with description to support@mikrotik.com. We will try to reproduce and fix it.
Sent as requested
 
onega
just joined
Posts: 2
Joined: Fri Apr 19, 2013 5:05 pm

Re: The Dude, v6.38rc test builds.

Fri Nov 18, 2016 4:38 pm

DUDE FEATURE REQUEST:

Ability to specify custom port number for Winbox connections (e.g. to connect to multiple MTiks behind single public IP).

Many thanks for consideration.

...also is there a dedicated thread to post DUDE feature requests?
 
Ayapov8
just joined
Posts: 2
Joined: Mon Nov 21, 2016 4:49 am

Re: The Dude, v6.38rc test builds.

Mon Nov 21, 2016 4:59 am

Update my CCR to RouteOS 37.1 and DUDE. Problem: Dude no send syslog to remove server. Pleas help me
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Mon Nov 21, 2016 11:49 am

Another problems with latest RC versions:

When I schedule dude db backup on RouterOS (with
/dude export-db
command), I always get my custom font removed from disk after the operation and not available in Dude any more.

I also noticed that custom MIB, font and image files are contained in backup file, but do not get restored with
/dude import-db
command. I have to copy these files manually afterwards through WinBox and restart the Dude to be able to use them.
 
celeritynetworks
just joined
Posts: 9
Joined: Wed Sep 09, 2015 10:23 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 2:16 am

Email seems to be broken in 6.38rc30 and 31.
This is what I see in RouterOS log when I try to test email send from an email notification in Dude.
Screen Shot 2016-11-21 at 5.01.08 PM.png
Here is how the notification is setup:
Screen Shot 2016-11-21 at 5.12.04 PM.jpg
I've tried removing all the fields so that it just uses RouterOS Email settings, but no change. I looked in email server logs and it's not even trying to send it to the SMTP server.
When I send a test email from RouterOS using Winbox, it works just fine.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 2:05 pm

Shouldn't TLS Mode be not 'no' for that port?..
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 6:31 pm

Since 6.38rc30 I cannot add any custom files (images, etc) to the Dude directories.. Even it happens if Dude is stopped and it's directory is changed at another path. I use RB750gr3 - MMIPS. Please help.. the disk1|disk2 switching problem is still annoying on RC34..
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 6:45 pm

Another problems with latest RC versions:
which hardware do you use?
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 7:17 pm

Another problems with latest RC versions:
which hardware do you use?
I'm using Dude on CHR v6.38rc31 on vSphere server 5.5 right now, because on CCR the stable version 6.37.1 was exhausting memory and CPU.
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 7:20 pm

Thanks for fixing the smb crash in v6.38rc34, it is working ok now.
Keep up the good work :)
 
doush
Long time Member
Long time Member
Posts: 665
Joined: Thu Jun 04, 2009 3:11 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 22, 2016 8:46 pm

Adding a user with only a "dude" permission doesnt work. User cannot login
 
User avatar
HiltonT
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Feb 07, 2011 4:24 am
Location: 'Srayamate
Contact:

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 12:10 am

DUDE FEATURE REQUEST:

Ability to specify custom port number for Winbox connections (e.g. to connect to multiple MTiks behind single public IP).
This is where RoMON comes in handy. Configure RoMON on the gateway MikroTik device and set a password. Configure RoMON on the internal MikroTik devices and use the same password. Then in WinBox, select the gateway MikroTik device and choose "Connect to RoMON" and WinBox will connect to the gateway MikroTik device, change the bottom tab to "RoMON Neighbors" and you will see all the devices listed by MAC Address, with their Identities shown.

If you choose to Add/Set a RoMON device, it will add it to the main "Managed" tab with the "Address" listed as the MAC Address. I then group these under each client's code and then add a Note so I can tell more easily which internal device this is.

- Hilton
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 8:03 am

Guys, if there any ability to do such thing - connect links not in one point but in edge of object? When i want to draw 50 ports it become such a mess.

May be it should be able to make curves or polylines?
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 8:05 am

That is something I was planning to ask for too. I am for it!
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 2:03 pm

+1 (for multiple links betwee devices, for example)

also, it would be nice to have a possibility to set Interface for both ends of the link (to see that the link is from port 5 of switch1 to port 7 of switch 2)
 
sup5
Member
Member
Posts: 359
Joined: Sat Jul 10, 2010 12:37 am

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 2:42 pm

Currently I solve this issue by putting a static-item inbetween a link.

This allows for
- links with angles
- setting both ends of a link with interface (and stats)
- drawing more than one link between two devices.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 2:47 pm

Currently I solve this issue by putting a static-item inbetween a link.
I was thinking about this, but...
dude.jpg
You do not have the required permissions to view the files attached to this post.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 3:11 pm

Version 6.38rc35 has been released.

Changes since v6.38rc32:

*) Fixed - Dude client stuck on "getting stuff state".
*) Fixed - Disk name were changed on RB hEX if the dude was used on USB flash or mSD card.

For security reasons it's suggested to make backups before upgrade.
http://wiki.mikrotik.com/wiki/Manual:Th ... ort_export

If you experience version related issues, give us detailed steps how to reproduce problem.

Also thank you all for suggestions and reports, we will take a look what we can improve in the Dude.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RE: Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 3:26 pm

Currently I solve this issue by putting a static-item inbetween a link.

This allows for
- links with angles
- setting both ends of a link with interface (and stats)
- drawing more than one link between two devices.
I have been using it for years also. But it is very poor solution.

I need multiple links between the same devices also. The idea to make link independently configurable by the endpoint devices / interfaces is the same I had in mind. It is also necessary to be able to replug the ends of the link from one old device to other new device without loosing the graph data.
 
User avatar
leoktv
Trainer
Trainer
Posts: 144
Joined: Thu Dec 01, 2005 1:39 pm
Location: sweden
Contact:

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 5:39 pm

The problem with Dude client stuck on "getting stuff state" are confirmed solwed thanks MikroTik
 
nje431
Frequent Visitor
Frequent Visitor
Posts: 95
Joined: Tue Sep 10, 2013 5:17 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 9:03 pm

Now that the Dude supports maps in Webfig, I updated our test Dude from 6.37rc15 to 6.38rc35. A few things I'm seeing with the Webfig maps:

Can't click on a sub-map from the primary map to display it.

Background images take forever to display.

It's not displaying the temperature symbol correctly. It's adding the additional  in front of the ° character. It displays correctly in both the 6.38rc35 Dude client, and in our 4.3 production Dude and Web clients. Appearance label: [Site_Temperature_Display()] °
Clipboard02.jpg
You do not have the required permissions to view the files attached to this post.
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Wed Nov 23, 2016 10:52 pm

Yes! Now Dude does not make disk name to be changed, but I cannot add any custom files to its directories even directly to RB/Files.. Please repair it and make available to add custom files over client...
 
User avatar
HiltonT
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Feb 07, 2011 4:24 am
Location: 'Srayamate
Contact:

Re: The Dude, v6.38rc test builds.

Thu Nov 24, 2016 1:21 am

Guys, if there any ability to do such thing - connect links not in one point but in edge of object? When i want to draw 50 ports it become such a mess.

May be it should be able to make curves or polylines?
So, so yes!!!

And also, why is the "Wireless" link so... big?
 
User avatar
HiltonT
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Feb 07, 2011 4:24 am
Location: 'Srayamate
Contact:

Re: The Dude, v6.38rc test builds.

Thu Nov 24, 2016 1:22 am

+1 (for multiple links betwee devices, for example)

also, it would be nice to have a possibility to set Interface for both ends of the link (to see that the link is from port 5 of switch1 to port 7 of switch 2)
+1
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Thu Nov 24, 2016 10:48 am

Dude, please make links more cool, i even make White Russian for you :)
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: The Dude, v6.38rc test builds.

Thu Nov 24, 2016 3:46 pm

Why on "link full" the colour don't change like in previous version 4.0beta or version 3?
Thanks for support

Attached image of dude 6.37.2
Immagine.png
You do not have the required permissions to view the files attached to this post.
Last edited by sparrow on Fri Nov 25, 2016 4:44 pm, edited 2 times in total.
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: The Dude, v6.38rc test builds.

Thu Nov 24, 2016 4:43 pm

And also if a service come back up from down, status on service outage does not change, is it normal??And its not possible to remove Resolved outages.........
Attached image below.
Immagine.png
You do not have the required permissions to view the files attached to this post.
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: The Dude, v6.38rc test builds.

Fri Nov 25, 2016 11:12 am

I have this message also:
dude,critical queued 33758554 bytes for write to db. Please consider faster storage otherwise out of memory condition or data loss can occur
Im using an ssd and ros is installed on a vmware machine to test the system before to make it in production
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Sat Nov 26, 2016 10:33 am

Still no graph labels in Device -> history tab in rc37.
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Mon Nov 28, 2016 8:06 am

Guys, in 37rc i get dude works! Thx goes to Pauls
- email support. But i have some troubles now.
1. I put font arial.ttf - its gone. Afetr i connect i see rectangles instead of russian letters. I put it again - wow, russian letters there again. Close Dude for a while. Run again - rectangles again, look into files - arial.ttf gone(whata...) Put it again - works for now.

2. Cant see snmp values on links. If i goes to node in snmp tab i can see speed on ports.
3. I have two monitors. If i open dude on 2nd and open preferences it can jump to 1st monitor. RRRRRR make me mad :)
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Mon Nov 28, 2016 9:33 am

Version 6.38rc37 has been released.

*) Fixed - default files will be stored in dude files folder if the file system does not support symlinks (fat32)
*) Fixed - avoid going into loop (Dude client could get stuck in loading phase)

Note !

Since dude has received major changes in recent versions, some fixes will be included only in 6.38+
Some bugs might be reproducable only on specific hardware, server and network configuration, etc..
List of recently reported problems:

strzinek - /dude export-db|import-db, and device -> graph issue.
Problem not reproduced, please give us remote access.

celeritynetworks - dude email notification is configured under notifications -> type email. If there are any problems in Ros/Dude email, enable email debug logs, to see where it stucks.
maxkrok - should be able to add custom files to dude/files dir.
doush - minimum polices for user to use dude is read + dude.
sparrow - monitored service types, like cpu, memory, disk... will take more time to reload, this means you will still see device in outage tab even it is recently came up.
Button "remove resolved" will remove only services without active status.

Also will take a look at denser reported issues.

If you still can reproduce problem using the latest RC, please allow us remote acces to your dude server, with
ability to install special debug package on this device, if it's will be necessary. Send all information to support@mikrotik.com,
also describe steps how to repeat the problem.

Reproduced issues:
nje431 - Background image load, ° symbol problem.

Recent feature requests for consideration:

*) Ability to specify custom port number
*) Links with edges
*) Multiple links between devices curves or polylines
*) Specify link port on both ends
*) Can't click on a sub-map from the primary map to display it. (webfig)
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.38rc test builds.

Mon Nov 28, 2016 12:12 pm

6.38rc14 (Release candidate)

my requests

1. all alerts that have occurred in non-active time for such notifications for example between 00:00-08:00, should be added to the queue and be send at the beginning of an active time. If by that time the service started to function, the notification shall be removed from the queue.
alert_email.png
2. If the main map contains several submaps, and added there devices are set depending on (parents), and when the device is not working in the tree above, I should get one notification about device failure which is highest on the tree even if it is on a different submap. Now i have many alerts. Maybe I have problem configuration of the DUDE?
not.pngnot_10.png

no solution for these problems?
 
dcolli
just joined
Posts: 6
Joined: Mon Mar 12, 2012 4:08 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 29, 2016 1:26 am

The execute on Server dont run script.
 
denser
just joined
Posts: 12
Joined: Thu Dec 04, 2014 6:19 pm

Re: The Dude, v6.38rc test builds.

Tue Nov 29, 2016 6:17 am

I put font arial.ttf - its gone. Afetr i connect i see rectangles instead of russian letters. I put it again - wow, russian letters there again. Close Dude for a while. Run again - rectangles again, look into files - arial.ttf gone(whata...) Put it again - works for now.
Some worksaround. Arial.ttf vanishes when old dude client connects and update itself.... Strange behavior.

Have another request (not onlu dude. capsman too) - autoload fresh versions of packages: analyse devices (caps in capsman) and download in prorep folder all needed files - files/packages on dude and folder pointed in properties in capsman.
 
User avatar
chimaster
Member Candidate
Member Candidate
Posts: 133
Joined: Tue Feb 07, 2006 8:54 am
Location: Queenstown
Contact:

Re: The Dude, v6.38rc test builds.

Wed Nov 30, 2016 1:29 am

Hey Dudes,

What happened to Address Lists?

Ok, that was brief, I'll Edit this up. Struggling with stability on 6.37.1,2,3 on x86, have tried to put our Dude onto CCR but that is also perfing out. x86 is based around SSL / CPU load, CCR is I don't know why. No idea why it's suddenly so unstable.

So trying to move to 6.38.something in the hope stability is there but it appears address lists have dissapeared. :( Can't find any mention of this in changelogs so assuming it's a bug, address list still turns up in /ip firewall address-list but they're pretty useless hanging over there as its our documentation when setting up routers / links in the dude.

Rock and a hard place over here with limited stability on "stable" releases and limited information / changes to core function (bugs) on unstable test builds.

We've got 2900 Access points and routers lulling around waiting for their admins to give them love, but right now.. the love.. it's .. .gone.

Can someone please think of the routers!?
 
Percanta
newbie
Posts: 39
Joined: Tue Feb 24, 2009 1:00 am

Re: The Dude, v6.38rc test builds.

Thu Dec 01, 2016 6:09 pm

address list are on routeros now, /ip firewall address , so its working blacklist again (y)
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Thu Dec 01, 2016 9:32 pm

6.38rc38 again adding custom files is not possible AT ALL.... Please repair...
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Sat Dec 03, 2016 12:43 pm

6.38rc40 again adding custom files on MMIPS 750gr3 is not possible AT ALL.... Please repair...
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 06, 2016 3:08 pm

Changes since 6.38rc37

*) Fixed - File upload to dude/file directory caused client crash
*) Fixed - Background images could disappear on version change
*) Fixed - Snmpwalk was not working properly in recent versions



asik

At the moment it's not in schedule, but the request is stored, thanks.

dcolli

Few quick tests didn't show problem here. Make sure your dude user has the same policies as your script.
Test it with some simple script, to see if problem is not in the script itself.

If issue remains, send supout file to support@mikrotik.com.

denser

suggestion reported to developers

chimaster

address list is removed from dude v6.38.x
Please use address list from RouterOS

Also it would be great if you could provide us with remote access to device with SSL load problem.
support@mikrotik.com

maxkrok

Problem not reproduced. Works with USB/SD card as data storage path, tested with Winbox. FTP.
Make sure you are placing files in dude/file directory.

If you can repeat problem, please write to support@mikrotik.com.
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 07, 2016 12:59 am

Changes since 6.38rc37
chimaster

Also it would be great if you could provide us with remote access to device with SSL load problem.
support@mikrotik.com

If you can repeat problem, please write to support@mikrotik.com.
I confirm this, there is some SSL load problem on x86 OS 6.38rc40, reboot fixed for now
Next time I'll give you remote.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Wed Dec 07, 2016 10:25 am

I've already reported high cpu load by SSL problem (the Dude is unusable) on both CCR and x86 to Mikrotik support three weeks ago. But I can't give a remote access for now. So if anyone has the same issue, please provide a remote access, so it can be investigated and solved.
 
strzinek
just joined
Posts: 13
Joined: Tue Oct 25, 2016 10:29 am

Re: The Dude, v6.38rc test builds.

Wed Dec 07, 2016 11:22 am

When I copy built-in tool to new one, I can't get rid of it afterwards. The copy cannot be removed. It says "cannot change built in (x)", although it is a copy and I can give it custom name and command. It shows star in flag column also as if it was really built-in tool.
 
User avatar
mylek
just joined
Posts: 4
Joined: Sun Jan 31, 2010 10:25 am
Location: Poland
Contact:

Re: The Dude, v6.38rc test builds.

Thu Dec 08, 2016 12:56 am

Before migrating from version 3.6 to the latest stop us lack of feature allowing to dump the list of devices in the form of a table: [map name where the device is] [device name] [IP address]. We use similar feature in Dude 3.6 via HTTP to export the device list with IP and location on the map to external databases (eg. smokeping). Any plans to add similar feature?
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Thu Dec 08, 2016 12:29 pm

Problem not reproduced. Works with USB/SD card as data storage path, tested with Winbox. FTP.
Make sure you are placing files in dude/file directory.

If you can repeat problem, please write to support@mikrotik.com.
I cannot repeat it... It is permanent.. Please test on MMIPS RB750gr3. On RC44 the same problem... The dude directory is read only or something like that... Other directories - OK... Wrote to support..

UPDATE! All DUDE files are is being rebuit after each dude restart/reboot.. All custom files get vanished after that.. On sd disk - fat32 you can add custom files to the dude directories (images, etc) but after reboot/restart everything is default again.. All logs also get vanished.. Please help!
 
derr12
Member
Member
Posts: 411
Joined: Fri May 01, 2009 11:32 pm

Re: The Dude, v6.38rc test builds.

Thu Dec 08, 2016 8:38 pm

Im still having background images disappear from the disk at random times on X86 (xenproject hypervisor) on rc30. have to re-upload one or two weekly.
 
alfonzz
just joined
Posts: 16
Joined: Wed Oct 15, 2014 12:16 pm
Location: CZ

Re: The Dude, v6.38rc test builds.

Thu Dec 08, 2016 9:15 pm

i use dude v6.38rc43 on new hex and there is maybe bug with RAM eating.
Hex stay up for 2 and half day and then reboot, for this time hour by hour eating the RAM until device reboot.
On dude i have about 1000 devices, monitoring by ping, some SNMP sonds etc.

It happens on earlier versions too.
 
alfonzz
just joined
Posts: 16
Joined: Wed Oct 15, 2014 12:16 pm
Location: CZ

Re: The Dude, v6.38rc test builds.

Fri Dec 09, 2016 1:09 pm

i use dude v6.38rc43 on new hex and there is maybe bug with RAM eating.
Hex stay up for 2 and half day and then reboot, for this time hour by hour eating the RAM until device reboot.
On dude i have about 1000 devices, monitoring by ping, some SNMP sonds etc.

It happens on earlier versions too.
All i want for Christmas is stable dude 6.38 :-)
 
FiShYmAn
just joined
Posts: 18
Joined: Sun Feb 22, 2009 11:20 am
Location: Taranaki, New Zealand
Contact:

Re: The Dude, v6.38rc test builds.

Sat Dec 10, 2016 1:24 am

Hi,

I am running dude 6.38 rc46, the last few builds have not been saving any changes for me, i have added new sites and devices in over 3-4 days and then the dude just reverts back to what it was like previous days ago - very frustrating.

Happy to setup remote access for support to look into it, ive lost several days work and would like a solution asap.

I've been using the dude since the beginning, loving the improvements, but this is a major bug.

Cheers,

Matt
 
2frogs
Forum Veteran
Forum Veteran
Posts: 713
Joined: Fri Dec 03, 2010 1:38 am

Re: The Dude, v6.38rc test builds.

Sat Dec 10, 2016 6:57 am

Upgrade from v6.38rc40 to v6.38rc46 on CHR has removed the Dude Package. I had a Dude session open when it upgrade...
 
Lakis
Forum Veteran
Forum Veteran
Posts: 703
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.38rc test builds.

Mon Dec 12, 2016 1:09 pm

Still SSL cpu load problem v6.38rc47
 
User avatar
deathmagicmedia
just joined
Posts: 6
Joined: Fri Jul 22, 2016 5:14 pm
Location: Cape Town, South Africa
Contact:

Re: The Dude, v6.38rc test builds.

Wed Dec 14, 2016 1:21 am

Will the Telegram notification support?
Agreed. It would be great if they added HTTP Notification as a notification type with custom parameters.

In the meantime, we created a Google Cloud App, which receives an email from the Dude server, converts the data, and then sends the data to Telegram. Our team will receive the data via our Telegram bot.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Wed Dec 14, 2016 3:52 pm

I managed to "fix" SSL high cpu problem (Ticket#2016111422000785) by increasing Connection timeout from 10s to 1m in Settings-RouterOS. On CCR it took a couple of minutes to get rid of SSL load after reboot, but it took much more time on x86 (4 cores). The problem was caused by hundreds parallel timed out connections to RouterOS (alive) devices and constantly repeating reconnections. After a successful connection to all RouterOS devices SSL load was gone.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 2:11 pm

Version 6.38rc51 has been released.

Changes since 6.38rc41

*) Fixed - Changed SSL connection timeouts. SSL connections caused CPU overload
*) Fixed - Minor changes in Dude fonts
*) Added - Dude icon in Winbox/Webfig

The SSL problem should be fixed with this version, please test and report if problem repeats.
Also note that if you have very large network map, with lot of securely connected devices, you will still get relatively high SSL usage by CPU.


maxkrok - we suggest to use only ext3 file system, it's more stable for dude, and more tested. Here only solution seems remote access > support@mikrotik.com

For other reports, please send an email with description to support. Each report is checked individually.

deathmagicmedia -
Please give us more details what would be the best HTTP Notification method

aTan - thanks for detailed SSL report.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 2:29 pm

Is it hard to replace embedded WinBox loader version 2 with current version 3?
Please give us more details what would be the best HTTP Notification method
just an ability to make GET/POST HTTP requests. I was surprised when did not found that type of notification in Dude v3 :)
 
francisconeto
Trainer
Trainer
Posts: 22
Joined: Thu Nov 10, 2011 5:55 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 2:30 pm

What about the commands terminal ?

ticket2016120822001445

/dude device print ==> show only the name of devices
/dude device-type print ==> show only the name
/dude service print ==> shiow nothing
/dude device device-group ==> Not exist
/dude probe print ==> show only the name
/dude notification print ==> show only the name
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 3:05 pm

Version 6.38rc51 has been released.
deathmagicmedia -
Please give us more details what would be the best HTTP Notification method
Calling https url with custom uri part with replaceable variables would be enough for me. And it should be usable in functions.
e.g. https://example.com/?api_key=my_api_key&ip=[Device.Address]&service=[Probe.Name]&state=[Service.Status]&another_custom_parameter=hello

PS: enabling/disabling ssl certificate verification would be also useful. Something like CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST in Curl.
 
digicomtech
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri Apr 20, 2007 5:03 pm
Location: Alma, Qc, Canada
Contact:

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 4:22 pm

Version 6.38rc51 has been released.
deathmagicmedia -
Please give us more details what would be the best HTTP Notification method
Calling https url with custom uri part with replaceable variables would be enough for me. And it should be usable in functions.
e.g. https://example.com/?api_key=my_api_key&ip=[Device.Address]&service=[Probe.Name]&state=[Service.Status]&another_custom_parameter=hello

PS: enabling/disabling ssl certificate verification would be also useful. Something like CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST in Curl.
Currently, we use this probe for HTTP and it works great:
Probe Type: TCP
Port: 80
Send: Authorization: Basic xxxxxxxxxxxxxt\r\n\r\nGET /state.xml HTTP/1.1\r\n\r\n
Receive: <input1state>0</input1state>

You can replace send with whatever HTTP request you want to send, and figure what you should receive.
You can use packet sniffer to help you find what is needed.

Using dude 6.38 rc 48 and it works good.
Don't know if it can suit for https stuff...

Regards,
Michael
 
RafaelUrsoft
just joined
Posts: 4
Joined: Wed Dec 14, 2016 4:42 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 4:33 pm

In my case it still has not been solved, SSL is very high and the CPU stays at 100% all the time. I have enough devices, but in version 6.36 opened and now I could not open the monitoring once.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 4:52 pm

Version 6.38rc51 has been released.
deathmagicmedia -
Please give us more details what would be the best HTTP Notification method
Calling https url with custom uri part with replaceable variables would be enough for me. And it should be usable in functions.
e.g. https://example.com/?api_key=my_api_key&ip=[Device.Address]&service=[Probe.Name]&state=[Service.Status]&another_custom_parameter=hello

PS: enabling/disabling ssl certificate verification would be also useful. Something like CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST in Curl.
Currently, we use this probe for HTTP and it works great:
Probe Type: TCP
Port: 80
Send: Authorization: Basic xxxxxxxxxxxxxt\r\n\r\nGET /state.xml HTTP/1.1\r\n\r\n
Receive: <input1state>0</input1state>

You can replace send with whatever HTTP request you want to send, and figure what you should receive.
You can use packet sniffer to help you find what is needed.

Using dude 6.38 rc 48 and it works good.
Don't know if it can suit for https stuff...

Regards,
Michael
But I need to send a notification through http request (service is up, service is down). There is no such type of notification as 'TCP Probe'. And it doesn't allow TLS/SSL connection.

PS: option to add custom headers is also a good idea.
 
OnixJonix
Frequent Visitor
Frequent Visitor
Posts: 68
Joined: Thu Jun 22, 2006 11:35 am
Location: Latvia

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 9:39 pm

Vector graphic for dude - all Mikroti Devices???
 
maxkrok
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Aug 28, 2012 9:09 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 20, 2016 11:57 pm

Version 6.38rc51 has been released.

maxkrok - we suggest to use only ext3 file system, it's more stable for dude, and more tested. Here only solution seems remote access > support@mikrotik.com
Thanx for expanations.. You should mention that custom files are available for upload to files directory only.. I tried images directory.. It is readonly..
 
RedM
just joined
Posts: 2
Joined: Wed Dec 21, 2016 4:21 am

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 4:23 am

I'm getting connection closed on both Winbox and The Dude with a number of users connected to The Dude server.
My only solution is to either get one of them to log out or reboot the machine and hope I get in to what I want before anyone else does.
I'm on 6.38rc51.
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 9:28 am

As the old dude ran into problems we migrated to the new dude on hex with a 2GB SD Card.
Runs smooth so far.

1166 Devices, 437 Service items, Polling interval 5min cpu 20-40%.
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 9:32 am

Device->General Router OS Status: "connect failed ... next attempt at: <time>"
shows a time 1 hour before actual time. The Hex the dude runs on shows correct time.
Version: 6.38.rc51
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 9:39 am

Feature request:

We have customers powering their device only at times they want to go online.
I would like:
- to see last time the device was online (to see if it is used at all).
- schedule an update in dude when he is able to connect this devices
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 9:50 am

Got a ping outage of a device. Right clicked on the device and selected Ack. The device gets blue on map. But the service is still in state outage (red flag). The dude flag in taskbar is blue.
6.38rc51 on hex.
 
alfonzz
just joined
Posts: 16
Joined: Wed Oct 15, 2014 12:16 pm
Location: CZ

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 12:55 pm

pls update winbox loader to v3 in DUDE!!! Thanks
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 2:11 pm

Version 6.38rc52 has been released.

Changes since last version

*) Removed - Since default Winbox used in the Dude wasn't fully compatible with all RouterOS devices, we removed it completely.
*) Fixed - Increased default ping packet size to 54bytes - there was some devices who wasn't able to respond with 32 byte ICMP packets, this caused ping corruption.

Note that you can still use Winbox in the Dude, by simply adding it as a custom tool:

Here is the quick example:
http://wiki.mikrotik.com/wiki/Manual:The_Dude_v6/Tools


ste - Check if the ping issue remains in recent version, if it does, write to support
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 2:26 pm

Is the Dude client autoupdate functional? I've tried it with several 6.38rc and it downloads something and then just shutdowns.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 2:29 pm

Is the Dude client autoupdate functional? I've tried it with several 6.38rc and it downloads something and then just shutdowns.
Should be fine to autoupdate from all recent versions, just make sure that you run the Dude as administrator. Does anybody else have seen similar problems recently ?
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 3:00 pm

Note that you can still use Winbox in the Dude, by simply adding it as a custom tool:
%HOMEPATH%\Desktop\winbox.exe doesn't work (Windows 10) in Tools, works in File Explorer. Ordinary users can place files only inside of their windows profile and each profile has its own path based on username.
Should be fine to autoupdate from all recent versions, just make sure that you run the Dude as administrator. Does anybody else have seen similar problems recently ?
Didn't work for rc49->rc51 and rc51->rc52 (as Administrator). I had to update it manually. Also would it be possible to allow update without Administrator rights? Many companies doesn't allow to have Administrator rights. And updating it only by company's network admin makes updating to a higher version very problematic.
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 3:14 pm

Note that you can still use Winbox in the Dude, by simply adding it as a custom tool:
%HOMEPATH%\Desktop\winbox.exe doesn't work (Windows 10) in Tools, works in File Explorer. Ordinary users can place files only inside of their windows profile and each profile has its own path based on username.
Should be fine to autoupdate from all recent versions, just make sure that you run the Dude as administrator. Does anybody else have seen similar problems recently ?
Didn't work for rc49->rc51 and rc51->rc52 (as Administrator). I had to update it manually. Also would it be possible to allow update without Administrator rights? Many companies doesn't allow to have Administrator rights. And updating it only by company's network admin makes updating to a higher version very problematic.
Another option would be to keep Dude client unchanged if only server is updated.
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 5:31 pm

Typo: "Authetication Failed" on Server Configuration Tab RouterOS
 
ste
Forum Guru
Forum Guru
Posts: 1924
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 5:34 pm

Winbox->Dude->Notification->Command: editable but Apply/Ok does not save changes.
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 7:59 pm

Note that you can still use Winbox in the Dude, by simply adding it as a custom tool:
%HOMEPATH%\Desktop\winbox.exe doesn't work (Windows 10) in Tools, works in File Explorer. Ordinary users can place files only inside of their windows profile and each profile has its own path based on username.
its important to find solution for this.

Another bug in tools/bandwith_test/ when - always "auth. fail" when start this tool
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 21, 2016 8:02 pm

when i upgrade to rc51 version background image is disapear AGAIN, when i upgrade to rc52 too.
 
alfonzz
just joined
Posts: 16
Joined: Wed Oct 15, 2014 12:16 pm
Location: CZ

Re: The Dude, v6.38rc test builds.

Thu Dec 22, 2016 12:22 am

Version 6.38rc52 has been released.

Changes since last version

*) Removed - Since default Winbox used in the Dude wasn't fully compatible with all RouterOS devices, we removed it completely.
*) Fixed - Increased default ping packet size to 54bytes - there was some devices who wasn't able to respond with 32 byte ICMP packets, this caused ping corruption.

Note that you can still use Winbox in the Dude, by simply adding it as a custom tool:
OMG.. nice solution :-(
Is there any chance to locate winbox.exe on router SDcard and run it from that location? with this "override" solution.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Thu Dec 22, 2016 10:41 am

Should be fixed in next release:

%HOMEPATH% variable resolve from Dude tool
Typo: "Authetication Failed
Winbox->Dude->Notification->Command:

Reported:
bandwith_test - auth. fail

aTan - Autoupgrade tested with multiple devices, multiple versions, should be something specific.

asik - background image disapear not repeated, remote access will be apriciated !

alfonzz - No the tool should be accessible from your Dude client, this means on OS where the Dude client is installed.


Also note that you can pass arguments to Winbox - IP, usrename, password, so the Winbox tool should work as before.

Code:

%HOMEPATH%\Desktop\winbox.exe [Device.FirstAddress] [Device.UserName] "[Device.Password]"
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26287
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: The Dude, v6.38rc test builds.

Thu Dec 22, 2016 12:46 pm

Is there any chance to locate winbox.exe on router SDcard
It must be in your Windows PC, not in the router.
 
celeritynetworks
just joined
Posts: 9
Joined: Wed Sep 09, 2015 10:23 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 27, 2016 6:16 am

Devs: thanks for all the work so far, appreciate it! Sorry I didn't reply with update to email notification issue not working. Original email problem (post #104) was resolved. Was originally on CHR. Loaded new x86 VM and email notifications started working so seemed to be something with that specific load of RouterOS.

I can confirm our map background images randomly disappear from disk, too. We are on 6.38rc40 and have had to replace a background image twice and it ultimately disappears from disk. It is missing again now.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Tue Dec 27, 2016 8:56 am

Devs: thanks for all the work so far, appreciate it! Sorry I didn't reply with update to email notification issue not working. Original email problem (post #104) was resolved. Was originally on CHR. Loaded new x86 VM and email notifications started working so seemed to be something with that specific load of RouterOS.

I can confirm our map background images randomly disappear from disk, too. We are on 6.38rc40 and have had to replace a background image twice and it ultimately disappears from disk. It is missing again now.
1. Please update your Dude server to the latest - 6.38rc version
2. If you can reproduce the problem, send mail with description to support@mikrotik.com
 
Ciambot
Member Candidate
Member Candidate
Posts: 144
Joined: Thu Jan 22, 2009 5:22 pm

Re: The Dude, v6.38rc test builds.

Wed Dec 28, 2016 10:06 am

%HOMEPATH%\Desktop\winbox.exe [Device.FirstAddress] [Device.UserName] "[Device.Password]"
In my case works only with this command:
C:\...\winbox.exe [Device.FirstAddress] [Device.UserName] [Device.Password]

also, if you wrong something in your path, error message shows clearly your password! :(
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.38rc test builds.

Thu Dec 29, 2016 4:22 am

I can confirm our map background images randomly disappear from disk, too. We are on 6.38rc40 and have had to replace a background image twice and it ultimately disappears from disk. It is missing again now.
1. Please update your Dude server to the latest - 6.38rc version
2. If you can reproduce the problem, send mail with description to support@mikrotik.com
I confirm this behavior as well. Not just the background image, but also some locally-added device images, such as CCR, RB2011, LHG -- only a few of them, not all of them. They disappear from dude/files/images and have to be re-uploaded. Problem seems to be triggered by release updates, and does not reoccur until next update. Reported this back on October 7.

I can also confirm the maddening "auth. failed" problem running bandwidth test in Dude. Reported it November 12, hoped it would be fixed by now. It forces me to turn off authentication on every device before I can run bandwidth test on it.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Thu Dec 29, 2016 11:57 am

I can confirm our map background images randomly disappear from disk, too. We are on 6.38rc40 and have had to replace a background image twice and it ultimately disappears from disk. It is missing again now.
1. Please update your Dude server to the latest - 6.38rc version
2. If you can reproduce the problem, send mail with description to support@mikrotik.com
I confirm this behavior as well. Not just the background image, but also some locally-added device images, such as CCR, RB2011, LHG -- only a few of them, not all of them. They disappear from dude/files/images and have to be re-uploaded. Problem seems to be triggered by release updates, and does not reoccur until next update. Reported this back on October 7.

I can also confirm the maddening "auth. failed" problem running bandwidth test in Dude. Reported it November 12, hoped it would be fixed by now. It forces me to turn off authentication on every device before I can run bandwidth test on it.
macsrwe - thanks for clarifying.

"auth. failed" problem is fixed, but we haven't released version where the fix is included. (next 6.38rc or stable 6.38)

Also please make sure, that all custom files are stored in dude/files directory only, as it is stated in the manual:

Your custom uploaded mibs/images/etc need to be stored in: "(data-path)/files/" directory.
http://wiki.mikrotik.com/wiki/Manual:Th ... 37_release

Ciambot - also the fix for windows variables is not released yet.
 
User avatar
macsrwe
Forum Guru
Forum Guru
Posts: 1007
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.38rc test builds.

Fri Dec 30, 2016 12:34 am

Also please make sure, that all custom files are stored in dude/files directory only, as it is stated in the manual:

Your custom uploaded mibs/images/etc need to be stored in: "(data-path)/files/" directory.
http://wiki.mikrotik.com/wiki/Manual:Th ... 37_release
Thanks, I didn't realize that.

Is it OK if we organize our custom images by creating a new subfolder under dude/files, e.g., dude/files/custom-images/, or will that cause problems as well? I imagine the custom images would no longer automatically "take priority over 'defaults' in case of duplicates," but I haven't been depending on that behavior anyway.
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: The Dude, v6.38rc test builds.

Fri Dec 30, 2016 10:43 am

Mastering Type "routerOS" doesn't work, dude map show me all "?" SNMP works good
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Fri Dec 30, 2016 12:56 pm

macsrwe - Yes you can also place your custom folder under dude/files

sparrow - check if you can receive RouterOS data from that device - under RouterOS -> Interface. You should see the same results as in your link label

Image

"?" will be shown if no data has been received.
 
Filip92
just joined
Posts: 13
Joined: Fri Dec 30, 2016 6:28 pm
Location: Stalowa Wola
Contact:

Re: The Dude, v6.38rc test builds.

Fri Dec 30, 2016 6:40 pm

Hello everyone,

I want to report a problem with the upload file function in v6.38RC52 on mmips RB750GR3 - in this version and with this device, traditional "drag and drop" does not work, but there is a new button "upload"
Image

because the device has only 15 megabytes of embedded memory, it should be possible to choose the destination disk (SD card or Pendrive)...
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Mon Jan 02, 2017 12:58 pm

Hello everyone,

I want to report a problem with the upload file function in v6.38RC52 on mmips RB750GR3 - in this version and with this device, traditional "drag and drop" does not work, but there is a new button "upload"
Image

because the device has only 15 megabytes of embedded memory, it should be possible to choose the destination disk (SD card or Pendrive)...

Test from Windows / Linux didn't show problems with drag&drop

Maybe some OS related problem. Try to open files window, and drop file in some folder
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.38rc test builds.

Mon Jan 02, 2017 4:05 pm

Is there a changelog for the Dude 6.38 final release?
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.38rc test builds.

Mon Jan 02, 2017 4:42 pm

Version 6.38 is released

Full changelog and discussions will be on this topic:
http://forum.mikrotik.com/viewtopic.php?f=21&t=116356

Who is online

Users browsing this forum: No registered users and 10 guests