To my knowledge, this problem was not present on 7.8.
HW:
FS DAC cable - SFP
CRS310-1G-5S-4S+ (7.8 -> 7.10)
CRS112-8P-4S (7.8 -> 7.10)
DAC is in the SFP slot on both of the switches.
I upgraded the switches from 7.8 to 7.10. No incident, except the DAC cable between the switches stopped working. The reason appears to be that both switches now read the temperature of the DAC to be 255 degrees Celsius, which causes temperature shutdown for the DAC interface. If I set the treshold temperature to 256 on both ends, the DAC starts working. The actual temperature if the DAC is something like 40-50 degrees C.
-
-
FuscaSoftware
just joined
- Posts: 5
- Joined:
- Contact:
Re: FS 1G DAC cable on 7.10 - wrong temperature
Hello!
Since today I also have the problem the temperature of two of my sfp modules (DAC) is recognized as 255.
Ok, set the limit to 256 and just ignore. So the DAC is working.
BUT:
Because of this recognized temperature the switch fans are running with full speed now. I am using this switch in my living room, so it's a big problem!
Are there any possibilities to switch off the monitoring of a module's temperature completely?
yours sincerely
Sebastian Braun
PS:
My system:
Since today I also have the problem the temperature of two of my sfp modules (DAC) is recognized as 255.
Ok, set the limit to 256 and just ignore. So the DAC is working.
BUT:
Because of this recognized temperature the switch fans are running with full speed now. I am using this switch in my living room, so it's a big problem!
Are there any possibilities to switch off the monitoring of a module's temperature completely?
yours sincerely
Sebastian Braun
PS:
My system:
Code: Select all
[admin@MikroTik] /system/resource> print
uptime: 5m51s
version: 7.11rc2 (testing)
build-time: Aug/03/2023 10:50:21
factory-software: 6.41
free-memory: 952.7MiB
total-memory: 1024.0MiB
cpu: ARM
cpu-count: 2
cpu-load: 2%
free-hdd-space: 1640.0KiB
total-hdd-space: 16.0MiB
write-sect-since-reboot: 100
write-sect-total: 548890
architecture-name: arm
board-name: CRS317-1G-16S+
platform: MikroTik
You do not have the required permissions to view the files attached to this post.
Last edited by FuscaSoftware on Tue Aug 08, 2023 9:23 pm, edited 2 times in total.
-
-
FuscaSoftware
just joined
- Posts: 5
- Joined:
- Contact:
Re: FS 1G DAC cable on 7.10 - wrong temperature
[ I want to delete this post, but I just get a white page. ]
Who is online
Users browsing this forum: Bing [Bot] and 7 guests