I'm running ROS 7.12.1 OSPF/MPLS between CCR1036-RB5009-NP16P, I would like to allow via LDP to pass only necessary loopback IP addresses 10.254.200.0/24 , by using
But doesn't work, still on routing table appear all LDP routes from all other routers./mpls ldp advertise-filter
add advertise=yes disabled=no prefix=10.254.200.0/24 vrf=main
add advertise=no disabled=no prefix=0.0.0.0/0 vrf=main
/mpls ldp accept-filter
add accept=yes disabled=no prefix=10.254.200.0/24 vrf=any
add disabled=no prefix=0.0.0.0/0 vrf=any
Even on /mpls lpd accept-filter if allow only a specific neighbor, again passes all other routers LDP labels.
Do i missed something on configuration or its a bug?