I'm running SwOS on my CRS309-1G-8S+ and anytime I try to open the SFP tab, the tab hangs forever. I can't even navigate away via clicking on another SwOS tab or even via typing in just the base URL. The only fix is to close the browser tab and start over. Note: this occurs on all browsers tried (Chrome, Firefox, Android Chrome).
I am using third-party SFP+ modules, but I believe this SFP tab was working fine in the factory version of SwOS that shipped with my device.
-
-
jakeman2048
just joined
- Posts: 5
- Joined:
SwOS bugged SFP tab
You do not have the required permissions to view the files attached to this post.
-
-
jakeman2048
just joined
- Posts: 5
- Joined:
Re: SwOS bugged SFP tab
An SNMP walk of 1.3.6.1.4.1.14988.1.1.19.1.1 is below. It seems only the "Tx Bias Current" is populated with a real value.
I believe this shows that it's not just an issue with the web/browser component. SwOS itself is unable to get the SFP details at all.
I believe this shows that it's not just an issue with the web/browser component. SwOS itself is unable to get the SFP details at all.
Code: Select all
iso.3.6.1.4.1.14988.1.1.19.1.1.2.1 = STRING: "SFP1"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.2 = STRING: "SFP2"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.3 = STRING: "SFP3"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.4 = STRING: "SFP4"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.5 = STRING: "SFP5"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.6 = STRING: "SFP6"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.7 = STRING: "SFP7"
iso.3.6.1.4.1.14988.1.1.19.1.1.2.8 = STRING: "SFP8"
iso.3.6.1.4.1.14988.1.1.19.1.1.5.1 = Gauge32: 85000
iso.3.6.1.4.1.14988.1.1.19.1.1.5.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.3 = Gauge32: 819500
iso.3.6.1.4.1.14988.1.1.19.1.1.5.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.5 = Gauge32: 819500
iso.3.6.1.4.1.14988.1.1.19.1.1.5.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.5.8 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.6.1 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.2 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.3 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.4 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.5 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.6 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.7 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.6.8 = Gauge32: 4294967168
iso.3.6.1.4.1.14988.1.1.19.1.1.7.1 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.3 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.5 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.7.8 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.1 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.2 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.3 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.4 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.5 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.6 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.7 = Gauge32: 0
iso.3.6.1.4.1.14988.1.1.19.1.1.8.8 = Gauge32: 0
End of MIB
Last edited by jakeman2048 on Thu Feb 22, 2024 7:09 am, edited 1 time in total.
-
-
jakeman2048
just joined
- Posts: 5
- Joined:
Re: SwOS bugged SFP tab
For comparison, here's someone else's output on the same version of SwOS:
Note that they only have one SFP interface, but that shouldn't matter for the comparison.
Code: Select all
iso.3.6.1.4.1.14988.1.1.19.1.1.2.6 = STRING: "SFP"
iso.3.6.1.4.1.14988.1.1.19.1.1.5.6 = Gauge32: 85000
iso.3.6.1.4.1.14988.1.1.19.1.1.6.6 = Gauge32: 31
iso.3.6.1.4.1.14988.1.1.19.1.1.7.6 = Gauge32: 3368
iso.3.6.1.4.1.14988.1.1.19.1.1.8.6 = Gauge32: 7
Note that they only have one SFP interface, but that shouldn't matter for the comparison.
Who is online
Users browsing this forum: No registered users and 3 guests