Hello,

I have a router mikrotik hap ax3 which is connected to my ISP on ether1, recently i needed to add a device which is a Duo Wifi Powerline adapter from Essentiel b brand.
The wifi module is plug into the electrical outlet into the living room and the other adapter is plug into the office room where the ISP and mikrotik are.
I have not much option to configure in the web interface from the PLC device, the IP of the device is 192.168.1.200 and i have the MAC Address also.
I have connected this PLC device with RJ45 cable to the ether3 port from the mikrotik.
Once i am connected to the wifi of PLC i have no internet access.

Can you help me configure the mikrotik to allow internet access on the PLC device please?

Firstly, find in the ARP list what IP was assigned to the PLC by Mikrotik and then add a static route with gateway being the address you just found:

Hi, thank you for your response.

The problem was the PLC material didnt work at all, cant pair the two devices, i return it and buy an TP-link and it work instantly

Its resolve if you want to close this case