Almost all devices connect wirelessly without a problem. I have a device such as my controller to a sprinkler system that connects over wifi. I see the DHCP server lease an IP address to my controller but it does not last for more than 2 minutes. My log shows the device gets assigned an IP and then de-assigned less than a minute or two. Once de-assigned, its gets reassigned immediately. I initially thought it was isolated to one device, but now I see (2) thermostats that show the same pattern. Any thoughts?
Log from sprinkler controller:
Thermostat:
Code: Select all
# 2024-01-29 22:24:00 by RouterOS 7.13
# software id = CYUY-IY5X
#
# model = RB5009UPr+S+
# serial number = XXXXXXX
/interface bridge
add name=local
/interface wireguard
add listen-port=13231 mtu=1420 name=wireguard1
/interface list
add name=WAN
add name=LAN
/ip pool
add name=dhcp ranges=192.168.0.100-192.168.0.254
/ip dhcp-server
add address-pool=dhcp interface=local lease-time=3d name=dhcp1
/interface bridge port
add bridge=local interface=ether1
add bridge=local interface=ether2
add bridge=local interface=ether3
add bridge=local interface=ether4
add bridge=local interface=ether5
add bridge=local interface=ether6
add bridge=local interface=ether7
add bridge=local interface=ether8
/ip neighbor discovery-settings
set discover-interface-list=none
/interface list member
add interface=sfp-sfpplus1 list=WAN
add interface=wireguard1 list=LAN
add interface=local list=LAN
/interface wireguard peers
add allowed-address=192.168.100.2/32 interface=wireguard1 public-key="XXXXXXXXXXXXXXXXXXXXXXXXX1="
add allowed-address=192.168.100.3/32 interface=wireguard1 public-key="XXXXXXXXXXXXXXXXXXXXXXXxX2="
/ip address
add address=192.168.0.1/24 interface=local network=192.168.0.0
add address=192.168.100.1/24 interface=wireguard1 network=192.168.100.0
/ip cloud
set update-time=no
/ip dhcp-client
add interface=sfp-sfpplus1
/ip dhcp-server lease
/ip dhcp-server network
add address=192.168.0.0/24 dns-server=198.168.0.1,1.1.1.1,8.8.8.8,8.8.8.4 gateway=192.168.0.1
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMP" disabled=yes log=yes protocol=icmp
add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=accept chain=input comment="WG handshake" dst-port=13231 log=yes protocol=udp
add action=accept chain=input in-interface-list=LAN
add action=drop chain=input comment="drop all else"
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related hw-offload=yes
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=forward comment="internet traffic" in-interface-list=LAN out-interface-list=WAN
add action=accept chain=forward comment="Remote to LAN" in-interface=wireguard1 out-interface-list=LAN
add action=accept chain=forward comment="port forwarding" connection-nat-state=dstnat disabled=yes
add action=drop chain=forward comment="drop all else"
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface-list=WAN
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=192.168.0.0/24,192.168.100.0/24
set ssh disabled=yes
set api disabled=yes
set winbox address=192.168.0.0/24
set api-ssl disabled=yes
/ip ssh
set strong-crypto=yes
/system clock
set time-zone-name=America/Chicago
/system note
set show-at-login=no
/tool bandwidth-server
set enabled=no
/tool mac-server
set allowed-interface-list=none
/tool mac-server mac-winbox
set allowed-interface-list=none
/tool mac-server ping
set enabled=no
/user settings
set minimum-password-length=8
