Hello,
Please can some one give me a bit of info.. I have looked at this link
http://www.mikrotik.com/testdocs/ros/2. ... bproxy.php and confused the hell out of me..
And i am well still confused.. We run a 2.6 Squid server on a standalone machine. I dont want the ROUTEROS to handle the cache, all i want is it to forward all the webpage requests to the SQUID Server.
Ok this is our network layout
192.168.0.x/24 Customers -----> 192.168.0.251 (RouterOS Gatway) ----> 192.168.0.2 DNS Server -----> 192.168.0.4 --- Squid Server ----> 192.168.0.1 Internet Modem
Here is my config so far:
# ADDRESS NETWORK BROADCAST INTERFACE
0 ;;; local Lan
192.168.0.251/24 192.168.0.0 192.168.0.255 ether1
1 ;;; WAN
192.168.9.100/24 192.168.9.0 192.168.9.255 ether2
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN..
0 A S 0.0.0.0/0 r 192.168.9.1 1 et..
1 ADC 192.168.0.0/24 192.168.0.251 0 et..
2 ADC 192.168.9.0/24 192.168.9.100 0 et..
So do i need to add a route or use the ROUTEROS Proxy and point and a parent proxy.
I WILL UNDERSTAND THIS ONE DAY! If anyone can point me in the right direction to a simple way to configure this, as i am very new to ROUTEROS and SQUID so its a learning curve.
Then all i have to get working is NLB and failover..... then all done, PROJECT FINISHED!!!!! I have to say i would not have got this far with out this forum!! THANK YOU ALL!!!!!
Hope you can help...
Regards
D