I saw some posts about the NV2 package, but they referred to enabling a different package.
Did the fixes in the wireless-nv2 package get migrated into the general wireless package?
My symptoms are long ping times to the MT and just slow performance.
64 bytes from 192.168.111.1: icmp_seq=24 ttl=64 time=7.617 ms
64 bytes from 192.168.111.1: icmp_seq=25 ttl=64 time=4.602 ms
64 bytes from 192.168.111.1: icmp_seq=26 ttl=64 time=6.766 ms
64 bytes from 192.168.111.1: icmp_seq=27 ttl=64 time=10.470 ms
64 bytes from 192.168.111.1: icmp_seq=28 ttl=64 time=8.973 ms
64 bytes from 192.168.111.1: icmp_seq=29 ttl=64 time=7.524 ms
Request timeout for icmp_seq 30
64 bytes from 192.168.111.1: icmp_seq=31 ttl=64 time=9.114 ms
Request timeout for icmp_seq 32
64 bytes from 192.168.111.1: icmp_seq=33 ttl=64 time=11.468 ms
64 bytes from 192.168.111.1: icmp_seq=34 ttl=64 time=0.848 ms
64 bytes from 192.168.111.1: icmp_seq=35 ttl=64 time=4.643 ms
64 bytes from 192.168.111.1: icmp_seq=36 ttl=64 time=11.589 ms
Here is my config
0 R name="wlan1" mtu=1500 mac-address=00:0C:42:64:BE:60 arp=enabled interface-type=Atheros 11N
mode=ap-bridge ssid="mt-n" frequency=5300 band=5ghz-onlyn channel-width=20mhz scan-list=default
wireless-protocol=802.11 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=secure compression=no