Community discussions

MikroTik App
 
samuelongui
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 52
Joined: Wed Mar 02, 2011 9:07 pm

How to reset RB450G?

Wed Mar 16, 2011 11:52 pm

I have try this:

unplug DC adapter.
press reset.
connect DC adapter wihout stop pressing reset

it works on RB750G, but not on RB450G. which is the correct sequence? Without Winbox of course.

Thanks
 
fewi
Forum Guru
Forum Guru
Posts: 7717
Joined: Tue Aug 11, 2009 3:19 am

Re: How to reset RB450G?

Wed Mar 16, 2011 11:56 pm

http://routerboard.com/pricelist/downlo ... ile_id=143
Software Reset
It is possible to reset all software configuration by short-circuiting the reset-hole during the power-up (see
ROS reset in layout diagram). No confirmation or passwords will be asked, so use with caution. This feature
can be disabled in the “system routerboard settings” menu by switching the “enable-jumper-reset”
parameter to “no”.
 
samuelongui
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 52
Joined: Wed Mar 02, 2011 9:07 pm

Re: How to reset RB450G?

Thu Mar 17, 2011 12:02 am

Too difficult, I don't understand anything :?
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: How to reset RB450G?

Thu Mar 17, 2011 12:05 am

 
samuelongui
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 52
Joined: Wed Mar 02, 2011 9:07 pm

Re: How to reset RB450G?

Thu Mar 17, 2011 12:09 am

so, I have to close the hole, plug the jack DC and it will reset, correct?
 
User avatar
robby
just joined
Posts: 20
Joined: Mon Oct 17, 2005 9:34 am
Location: http://www.dcsindo.com
Contact:

Re: How to reset RB450G?

Thu Mar 17, 2011 5:24 am

 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: How to reset RB450G?

Thu Mar 17, 2011 10:29 am

so, I have to close the hole, plug the jack DC and it will reset, correct?
yes, correct. put some screwdriver (or anything metal) into the hole, apply power and wait until it boots.


it's much easier than netinstall, by the way
 
User avatar
robby
just joined
Posts: 20
Joined: Mon Oct 17, 2005 9:34 am
Location: http://www.dcsindo.com
Contact:

Re: How to reset RB450G?

Thu Mar 17, 2011 10:40 am

it's much easier than netinstall, by the way
Ha ha ha.. true Normis, for most people, but for me, it's easier using netinstall, maybe because I am quite used to it.
 
heviejob
Member Candidate
Member Candidate
Posts: 171
Joined: Mon Nov 30, 2009 4:54 pm

Re: How to reset RB450G?

Tue Feb 12, 2013 11:07 am

How do I get a RB450g into netinstall mode if I don't have a serial
console cable?
 
Cydon
just joined
Posts: 3
Joined: Wed Mar 23, 2016 6:17 am

Re: How to reset RB450G?

Wed Mar 23, 2016 6:25 am

does it has a button that need to be pressed ? the reset jumper hole
or just simply put a metal thing in that hole ?
i've been asked to reset RB450, but when i open the case and put a needle in the reset hole, there's nothing, i thought there would be a button or something
 
sash7
Frequent Visitor
Frequent Visitor
Posts: 68
Joined: Sun Mar 20, 2016 10:39 pm

Wed Mar 23, 2016 8:06 am

https://youtu.be/G-iIxxXcYq0

Sent from my LG-H502 using Tapatalk
 
Cydon
just joined
Posts: 3
Joined: Wed Mar 23, 2016 6:17 am

Re:

Wed Mar 23, 2016 10:00 am

https://youtu.be/G-iIxxXcYq0

Sent from my LG-H502 using Tapatalk
too bad the office where i currently interning doesn't give an access to youtube for bandwidth reason :s
thanks for replying tho

Who is online

Users browsing this forum: No registered users and 25 guests