Hello,
For a project in Benin I plan to buy tens to hundreds of mikrotik access points and routers of different type but this selection of Mikrotik is submit to a hard condition: users must be autheticated using EAP-PEAP and a radius server before accessing to the network.
For the access points, this means WPA/WPA2 entreprise with EAP-PEAP (this uses 802.1x) and for routers, this means that in order to receive an address from the DHCP server they must also be authenticated by EAP-PEAP. Both for the AP as for the router requirements, there are products that support it, say cisco APs, Zcom APs, Huawei leayer 3 switches etc. (that's what I use now)
I would prefer using mikrotik devices everywhere to get the same OS and the same user interface everywhere and this way ease the life of the operators and getting more devices for the money available. But this is only possible if the above requirements are satisfied.
So, 2 questions: 1. Is this supported by routerOS
2. If yes, how can it be configured? is it possible with the last version of the web interface, must one use command line. Could you gie me a clear escription, complete enough to be also usable by the operators.
Thank you in advance and best regards
Marc