Hello forum. I just purchased an RB2011L, upgraded to ROS 2.41, and backed up the config.
By default, the RB is configured for simple home routing with WAN/LAN/and NAT. The default LAN address is 192.168.88.0/24. Many other config settings (bridge, routes, DHCP service, DNS) depend on this address. I would like to change the LAN address to 192.168.1.0/24 together with all the dependencies. All of the LAN address dependencies need to be changed in a single transaction, rather than one-at-a-time. For instance, if I change the bridge-local net address to 192.168.1.0/24 and "Accept" then the configured IP Routes still refer to the old net address (192.168.88.0/24).
When do Winbox config changes take effect? Immediately? On reboot?
If I brick the RB, is there a (hardware?) factory reset for it?
thx. s.