2 ports on the same subnet. Possible?

sixfeetguy · Fri May 05, 2006 4:29 pm

Hi!

Is it possible to configure Mikrotik in such a way that 2 ports of my Routerboard 532 are on the same subnet?

Greetz,
Sixfeetguy

n3wwn · Fri May 05, 2006 5:04 pm

Is it possible to configure Mikrotik in such a way that 2 ports of my Routerboard 532 are on the same subnet?

Sure!

Just bridge the two ports and assign the IP address(es) to the bridge interface.

-Rich

sixfeetguy · Mon May 08, 2006 2:04 am

Hmm... I have created the bridge... But how do I add the 2 interfaces to it...?

changeip · Mon May 08, 2006 3:48 am

Or just add multiple addresses to the same subnet on the same interface. Use /32 for the additional addresses.

Sam

advantz · Mon May 08, 2006 7:58 am

/interface bridge port

then

pr

then

set <number1,number2,..> bridge=<bridgeinterfacename>

Mon May 08, 2006 8:39 am

using the latest MikroTik RouterOS version to add interface to bridge port,
use the following command
'interface bridge port add interface=interface_name bridge=bridge_name'

2 ports on the same subnet. Possible?

2 ports on the same subnet. Possible?

Re: 2 ports on the same subnet. Possible?

Who is online