I was trying to send a private message as the question I have doesn't really pertain to this post.. anyway I was unable to do so...
Are you able to pass PPPoE traffic through the CPE's setup in station-pseudobridge mode?
I would like to do away with our WDS clients as it causes much overhead and for most clients transparent 802.1d bridging is not required. I thought I saw something about the Pseudo-bridge mode not allowing PPPoE passthrough... Anyway if it does, it's definitely something to look forward to in ROS v3.
sorry for the slow response, didn't see your message... and no for some reason I can't send PM's either...
yes, we are passing PPPoE through station psudobridge just fine. just ensure that there is only one device plugged into ether1 otherwise you're going to see some really odd symptoms if there are 2 machines (even if only 1 is active, the arp traffic will cause the psudobridge to re-configure it's self and screw things for both machines connected.
my favorite thing about psudobridge, aside from not having WDS and the delay it causes when connecting, as well as that overhead, is that the default forward option actually does something again, and when you run winbox from a customer's house, you only see, their CPE, the AP, and the PPPoE server (assuming the discovery interface is enabled...)