I use 2ghz only for iOt-type devices almost exclusively.
This is the current config:
Code: Select all
[admin@212hAP-Ax3] /interface/wifi> print detail
Flags: M - master; D - dynamic; B - bound;
X - disabled, I - inactive, R - running
0 BI name="Guest212" mac-address=4A:A9:8A:0F:04:93 arp-timeout=auto
master-interface=wifi1
configuration.mode=ap .ssid="Guest212"
security.authentication-types=wpa2-psk,wpa3-psk
.passphrase="xxxxx"
1 M B ;;; DFS channel availability check (1 min)
default-name="wifi1" name="wifi1" l2mtu=1560
mac-address=48:A9:8A:0F:04:93 arp-timeout=auto
radio-mac=48:A9:8A:0F:04:93
configuration.mode=ap .ssid="Upstairs5g-0F0493" .country=United States
security.authentication-types=wpa2-psk .passphrase="xxxxxx"
.disable-pmkid=yes
channel.band=5ghz-ax .width=20/40mhz .skip-dfs-channels=disabled
2 M BR default-name="wifi2" name="wifi2" l2mtu=1560
mac-address=48:A9:8A:0F:04:94 arp-timeout=auto
radio-mac=48:A9:8A:0F:04:94
configuration.mode=ap .ssid="Upstairs-2G-0F0494" .country=United States
security.authentication-types=wpa2-psk .passphrase="xxxxxx!"
.management-protection=disabled
channel.band=2ghz-n .width=20/40mhz .skip-dfs-channels=disabled
Here is the 2g and 5g scans:
.
Thank you.