Router RB4011iGS+ (CAPSMAN)
cAP AX 7.3.3
cAP AC (several) any some other AP's all running 7.3.3
All the AC's are managed through CAPSMAN (old one below Wireless) I've 3 VLANS with different IP ranges. Bridge has all the ports added and Use IP firewall + IP Firewall för VLAN. All this works just fine and has done for a long time.
Now I want to upgrade to cAP AX . I rebooted the AX into CAP mode, enabled CAPSMAN on the router (under Wifi). The AX connects fine and I can see it under Remote CAP. I can also see that clients are connecting and being Authorised (A). I have added the new AX interfaces into the CAPSMAN-bridge with correct VLAN/admitt all/Ingress filtering (as I've done with all the other AP's)
In the CAPSMAN logs I see
BASE_DHCP assigned 192.168.1.157 for xx.xx.xx.xx.xx.xx
BASE_DHCP deassigned 192.168.1.157 for xx.xx.xx.xx.xx.xx
BASE_DHCP offering lease 192.168.1.157 for xx.xx.xx.xx.xx.xx without success
No client connecting to AX will get an IP address.
I shall add that all AP's are going through a MikroTik Switch, CSS106-5G. They have "Strict/Only untagged/Leave as" in the VLAN settings. All the same config as the all AC AP's
I've been in the rabbit hole for day's now and don't know how to proceed. Any pointing in a direction is much appreciated or if I shall add anything specific from an export.
Cheers